Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
I would not do the full bore to 849. Leave yourself some room. Knock on wood, I never had to rebuild my SXR but have done so many many many times on my SJ.......
My sxr lites build.
- Thread starter Hull_b
- Start date
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
you mean went back to Yamaha Blue!
for the third time.............
- Location
- Edmonton, Alberta
To late as it went down with him for the Mark Hahn race to be machined.
Sent from my SM-G900W8 using Tapatalk
Sent from my SM-G900W8 using Tapatalk
- Location
- Edmonton, Alberta
I'm planning on having my wife's ski as my back up and for riding when we're camping. Save my blue sxr for mostly races.
Going build here's exactly the same just a few different options and not the 849. Also be running a polar composites pole on it
Sent from my SM-G900W8 using Tapatalk
Going build here's exactly the same just a few different options and not the 849. Also be running a polar composites pole on it
Sent from my SM-G900W8 using Tapatalk
- Location
- Edmonton, Alberta
To many projects... while I'm waiting on my lites ski to get built. I have to decided on building my wife's ski... or my kids 300sx. Lol
Sent from my SM-G900W8 using Tapatalk
He could be carrying more corner speed, not letting off the throttle as much, taking better lines, etc. It's not likely the 849 doing it for him unless your ski is somehow a complete turd in comparison.
There's a certain level of nobility in winning with a smaller displacement motor.
As soon as the card goes sideways and orange band snaps, zip tie your throttle down and don't let go!
- Location
- Edmonton, Alberta
I wouldn't doubt my ski was a complete turd. Lol
In a straight line my buddies sxr that was bone stock started pulling on me and he weighs 50 pounds more then me.
No doubt he guy on the 849 is a better rider. I started riding skis last year and he's been doing it for a few.
But like everything I own I tend to go overboard so that's one of the reasons for the 849. Lol
Sent from my SM-G900W8 using Tapatalk
- Location
- Edmonton, Alberta
Can't race without having a logo.
Sent from my SM-G900W8 using Tapatalk
- Location
- Edmonton, Alberta
Well picked up a 04 today. .. hopfully turning it into my limited ski
Sent from my SM-G900W8 using Tapatalk
Sent from my SM-G900W8 using Tapatalk
- Location
- Edmonton, Alberta
Haha.... I got a jetski buying problem. Two more today
Sent from my SM-G900W8 using Tapatalk
- Location
- Edmonton, Alberta
I should probably start on these soon...
On a side note. Prowatercraft and jettrim order should be heading my way in a few weeks for the lites and limited skis.
Sent from my SM-G900W8 using Tapatalk
- Location
- Cold Lake, AB
did you order your gear from AJS? I put in an order for the sxr as well
I should probably start on these soon...
On a side note. Prowatercraft and jettrim order should be heading my way in a few weeks for the lites and limited skis.
Sent from my SM-G900W8 using Tapatalk
- Location
- Edmonton, Alberta
Some things I have coming from Ryan. But the Prowatercraft/jettrim/jetpilot stuff is all direct from them since they are sponsors for the 2017 season.
Sent from my SM-G900W8 using Tapatalk
- Location
- Cold Lake, AB
Oh ok. Are you altering your cooling system too?
- Location
- Edmonton, Alberta
Yes It will have dual cooling... as well as 849cc and some other tricks mike will do.
Sent from my SM-G900W8 using Tapatalk
- Location
- Cold Lake, AB
Yes It will have dual cooling... as well as 849cc and some other tricks mike will do.
Sent from my SM-G900W8 using Tapatalk
No excuse to be behind me this year, now I can say "good race" and not sound like a snob!
- Location
- Edmonton, Alberta
- Location
- Cold Lake, AB
I'll be set for novice open as well.
Sent from my SM-G900W8 using Tapatalk
I'm trying to get everything for an open ski. I have plans on a one-off ski. I doubt I'll have it ready for the races but I'm going to try! Aiming to have a water test by September if it all works out