- Location
- las vegas
need a pump for my 650sx what kind of pump should i buy from wal mart?
650/X-2 need a bilge pump
- Thread starter hemiorange650
- Start date
- Location
- NH
MattyBoom
Amsoil Rep/Machine Shop
- Location
- Long Island, NY
Like will said, most people use rule 500's some use 2, i had a rule 1100 in my sxr :-0 still sunk the ski tho haha
I guess it depends on how much water you get in your hull and if you want switched or an automatic unit.
I guess it depends on how much water you get in your hull and if you want switched or an automatic unit.
- Location
- las vegas
its taking like a finger length deep of water
- Location
- NH
A finger length is nothing unless you got really long fingers. 500 GPH has got you covered. Not sure if anyone makes a mounting braket for your ski so you might have to use epoxy to glue it down which kinda sucks.
Will
Will
- Location
- las vegas
well i would say like 3 or 4 inch isnt there a way when u like ride in staight lines it can flush it out? im still goin fer the pump though
MattyBoom
Amsoil Rep/Machine Shop
- Location
- Long Island, NY
Ski should have stock siphon bilge system but it takes forever, just stick with a 500 and a switch, you'll be set.
- Location
- las vegas
i empty all the water with a shopvac and there was 8 gallons of water:O
Joker
...chaos? Its Fair!
- Location
- La Porte, Indiana
you can make a simple bracket that mounts to where the stock syphon is it is pretty easy
- Location
- las vegas
haha alright will do
jdakrt
X
- Location
- Central VA
The bracket for the 750's should fit your ski. I took it out of my pro before I sold it and it is now in my x2. or, go the cheap route and marinetex or epoxy on in. just make sure you scuff the area and acetone it prior to installing the base. Installed both ways, and both worked well. Good luck.