Custom/Hybrid need help making cart tank dual pick up

[waksk8]

I have a Chan with a cart tank that is T'ed coming out of a single pick up in my tank. I have bought a tpe964 and am upgrading carbs and cant figure out how to make my cart tank have dual pick up. I know there have to be some type of fitting just cant find it.

 

[waksk8]

Here is a pic that you can see the tank, I have a fitting with my check valve in the top of the cap now.

 

[waksk8]

you dont need dual pick ups.

Ok I just figured going to 49s It was needed. That will save me some extra work.

 

[speedysprocket]

I run a 950 with 48 Novis off a single fuel pickup. Never had a lean issue... And when a return line pops off, she empties the fuel tank quick...

 

[CD155MX]

I agree with that the people said above, but if you're are still set on doing it I think cold fusion may have something you should look into.

Rock these with a clunk and you're in business.
http://cold-fusion.pinnaclecart.com/fuel/tank-compression-fittings/

 

[waksk8]

I agree with that the people said above, but if you're are still set on doing it I think cold fusion may have something you should look into.

Rock these with a clunk and you're in business.
http://cold-fusion.pinnaclecart.com/fuel/tank-compression-fittings/

Thanks that's what i thought I needed, but if most are just running single pick up I'll just stay with single.

 

[Factory928]

I have the same tank, what I did was put a fitting in the cap and became my vent, the middle nipple is my return and the red and black caps became my pick ups. Here's what you need.

http://www.accelerationkarting.com/suctionunitforfueltank.aspx