Need help with factory pipe
- Thread starter Sllim
- Start date
- Location
- conroe tx
Loctite?
Sent from my Z932L using Tapatalk
Sent from my Z932L using Tapatalk
- Location
- conroe tx
Did u use loctite brand?
Sent from my Z932L using Tapatalk
Sent from my Z932L using Tapatalk
- Location
- conroe tx
Helicoil time!
Sent from my Z932L using Tapatalk
Sent from my Z932L using Tapatalk
- Location
- conroe tx
Easy as 123 lol
Sent from my Z932L using Tapatalk
Sent from my Z932L using Tapatalk
- Location
- Arnold MO.
Mine are all the same length, I helicoiled my manifold before I installed it. Been on and off a few times (only by choice) with no issues.
Magyar68
Really!!!
- Location
- Lewisville
Some one may have tried to use the Super jet Socket cap replacement Bolt Kit. Which are 40mm long that setup requires a 50mm bolt. make sure the bolts you are using are m10 (10mm) 1.25 Pitch and 50mm Long.
Magyar68
Really!!!
- Location
- Lewisville
Also your Stator Wires going into your E-box are Going the Wrong way. Should be turned so that the wires are resting on the top of the E-box.
Magyar68
Really!!!
- Location
- Lewisville
Re-tapped? did he use Helicoils or just run a tap tool down the existing holes to clean them up? Those are not the standard bolts for that setup and using the correct length is important here.
Magyar68
Really!!!
- Location
- Lewisville
Ah for the exhaust most manufactures use Specifically 1.25 MM Thread Pitch bolts to keep them from Backing out. How long is the replacement bolts you are using.
Magyar68
Really!!!
- Location
- Lewisville
I guess start by making sure the new holes are completely clear of any Cutting oil, or any thing. The bolt Threads as well, use lock tight let it sit over night.