Need measurement off of a stock chinpad please

[FLY6584]

I want to turf my stock chinpad off my roundnose and I've got a sheet of turf leftover from my footholds, but I'm not sure if the the sheet of turf is big enough or not.

Right now with the stock cover and padding on the chinpad the turf will not reach all the way around the chinpad.

Before I rip off the cover and padding I want to make sure I have enough turf.

If someone has a stock chinpad without cover, padding, or turf on it would you mind measuring it for me and tell me what the measurement at the widest point is. Lenghtwise I am fine. Its the width I am worried about.

Thanks:biggthumpup:

 

[Big Kahuna]

sounds like you really dont have enough if your are short with the OEM chinpad, you need to be able to trim it, but heck rip that joker off, if you dont have enough I am sure one of us has a scrap of it.

 

[Mark44]

Remember to super glue the edge after trimming and heat it up before applying it to the plastic.

Mark44

 

[daylite67]

You can stretch it pretty good when it's heated up too.

 

[Watty]

I cut mine down about an inch all the way around. When you do that and turf it with no foam, it looks pretty trick!

 

[Big Kahuna]

use the underpadding also, and sand it to make it flow out better.

 

[FLY6584]

I cut mine down about an inch all the way around. When you do that and turf it with no foam, it looks pretty trick!

Any pics? That sounds pretty cool.:biggthumpup:

 

[FLY6584]

Still trying to get a measurement. Someones got to have a stock chinpad with no padding/turf on it laying around.

 

[Watty]

Any pics? That sounds pretty cool.:biggthumpup:

Not the best quality pic, but you get the idea...

 

[FLY6584]

Not the best quality pic, but you get the idea...

That does look very good:biggthumpup: