Super Jet Need pump mount bolts

[swapmeet]

I'm piecing my ski together, and realized I don't have pump mount bolts.
The thread size is M10 x 1.25 or 10mm fine thread.

If I use chrome I will have to have a stack of washers or a spacer, because when my tray was laid down it was directly on top of the mounts. Ideally I would like stainless. I've checked McMaster Carr, Grainger, and Fastenal and can't find anything. Does anyone have any suggestions?

 

[The Penguin]

I'm sure that's the "unobtanium" thread that is so hard to find.

best bet would be to PM jetmaniac or one of the other parts whores and buy a set from them.

 

[DirtyJ]

If its for an FX1 PM Hardcore, hes the Fx1 whore and one hell of a good guy!:biggrin:

 

[509freerider]

What length do you need? Fastenal should be able to get them in stainless and I know McCaster Carr has them. Fasteners is another option if you have one locally, but they have been a pain in my ass recently. I checked Fastenal a couple months back on stainless M10 x 1.25 and they could get them in both socket head and JAE style. You can always cut them to the length you need also, rarely do they have the exact length I need. I definatly wouldn't go with the chrome, they are junk!

 

[Waternut]

I've talked to Fastenal as well and they said they can order them. Mcmcaster doesn't carry those bolts in stainless. Couldn't even tell you how many times I've looked thinking it's impossible that they wouldn't have them.

 

[swapmeet]

Mcmcaster doesn't carry those bolts in stainless. Couldn't even tell you how many times I've looked thinking it's impossible that they wouldn't have them.

Thats what I was thinking. I'll call my local Fastenal again.

Dirty J, its a FX1 with a SJ pump cavity and pump. Not sure if they use the same bolts or not.

 

[Matt_E]

PM me your address, I'll send you some.
You need all four?

 

[509freerider]

I've talked to Fastenal as well and they said they can order them. Mcmcaster doesn't carry those bolts in stainless. Couldn't even tell you how many times I've looked thinking it's impossible that they wouldn't have them.

Wow! Your right, can't beleive McMaster does not have them, had to check. Must be the only thing they don't have!

 

[swapmeet]

PM me your address, I'll send you some.
You need all four?

Yep. I'd like to be able to cut them down, so I hope their stainless. If not I can washer them up and use some loctite.

Just got off the phone with Fastenal... uke: Basically they'd be making them from scratch.

 

[Matt_E]

I have stock bolts only. As far as I know, those are not stainless.

 

[swapmeet]

They'll work better than regular steel... thats for sure.

 

[Crab]

Wow! Your right, can't beleive McMaster does not have them, had to check. Must be the only thing they don't have!

No, they don't have a pole bolt either, it has to be made special order 50 minimum order from a local supplier.

 

[509freerider]

No, they don't have a pole bolt either, it has to be made special order 50 minimum order from a local supplier.

I wonder if Fastenal would make some with no minimum? I have checked with them on some other bolts and they would make them with no minimum order.

 

[Fro Diesel]

I need two of these bolts as well. I am in Vermont and my ski is in Michigan All i need is two pump bolts for an sj to finish when i get home in a couple weeks.

 

[swapmeet]

I wonder if Fastenal would make some with no minimum? I have checked with them on some other bolts and they would make them with no minimum order.

My local said they could make them...... $28ea uke:

PM Jetmaniac