Blaster New on the site have a couple questions

K

kcurran123

Location
Novi, Michigan
Hey everyone im a newb on the site and so far its been very helpful with great information. Well I have a friend who is selling a pipe was just interested if I could get some information on it. I attached a link of it and was told its like a factory b pipe. Is stock jetting fine with this pipe? Sound like a good deal?

http://detroit.craigslist.org/okl/boa/2903517273.html

Well now for the problems I have been having. Last year on my last ride my ski died in the middle of the lake, it sounded like I ran out of fuel but had plenty of it. So I pulled it out of the water changed the fuel filter tried to start it and it wouldnt. Then I drained all the fuel, pulled the carb off, cleaned it and put it back together, then stored it for the winter time. Well I just got back into it pulled the carb off cleaned it really well, and put it back together. I tried to start it and nothing so I poured a touch of gas in the cylinders and it started then died again. I think maybe I could have switched the lines putting them back together or something. Anyone know what else a problem could be?

Again awesome site, and thanks for the help

-Kyle
 
DAG

DAG

Yes, my balls tickled from that landing
Location
Charlotte, NC
Did you pull the insides of the carbs apart? Might have got the seals on the pump side backwards??
 
Waveblastermaster

Waveblastermaster

Location
Leland, NC
try to start it and hold the throttle and look down the carb, make sure its getting gas. if it started when u put gas in the carb but then sut back off it sounds like its not getting fuel.
 
You must log in or register to reply here.
Top Bottom