Novi 48mm Carb Dimension

[LimitedSlip7]

Can anyone tell me what the OD of Novi 48mm carb inlets are? My Full Spec 49s are 2.80" OD with a 118mm center to center spacing. I'm assuming all 62T carbs are going to use the same spacing? Any other large aftermarket carb inlet ODs would be helpful too...

Thanks!

 

[Dartman]

most later model intake manifolds are 118mm spacing
some of the early manifolds from r&d and rivas were 102mm spacing
if your talking about the air horn where the filter clamps on are usually the same on aftermarket carbs

 

[LimitedSlip7]

Yea, the outside of the air horn. I just want to confirm the dimension before proceeding with a project.

 

[LimitedSlip7]

I'll paypal someone a few bucks for the info!

 

[speedysprocket]

You're talking about where flame arrestors attach to? All the F/As have the same ID, so those adapters on the carbs all have the same ODs.

 

[CARBONX2]

71.7mm = 2.823"

 

[LimitedSlip7]

71.7mm = 2.823"

Thanks! What's your paypal?

 

[CARBONX2]

x-2@live.co.za

 

[CARBONX2]

Thanks