300/440/550 nozzel boring pics

[alberta guy]

Anyone have before and after pics of what the bored out nozzel looks like in a 550

 

[XJCrawler]

I don't think anyone will have any pictures of a bored 550 nozzle. Just take it to a machine shop and ask for a taper bore of whatever size you want

If you want I can post a picture of a taper bored superjet nozzle

 

[alberta guy]

im planning to do it myself at work. Im just dont know how far to machine in or what you do with the raised spot with the hole futher in the nozzel.

 

[XJCrawler]

I'm not to familiar with a 550 nozzle, but I have a bored 61x nozzle you could take a look at

 

[restosud]

bore size will vary on your combo.
if you want to retain the factory bilge you will need to epoxy a tube in the hole to recreate the stock setup.

 

[claudefrog]

I don't think anyone will have any pictures of a bored 550 nozzle. Just take it to a machine shop and ask for a taper bore of whatever size you want

If you want I can post a picture of a taper bored superjet nozzle

Fire a pic of this up if you can

 

[offroadenemy]

Contact #zero here on the X he taper bores nozzles all the time and they look really good, he will know the specs you are looking for.


Sent from my iPhone 4s using Tapatalk

 

[#ZERO]

I just dont know how far to machine in or what you do with the raised spot with the hole futher in the nozzel.

Machine the lip on the outside & the raised spot inside; insert a stainless tube or fill the hole with epoxy depending on if you want the stock siphon bilge intact.