Opinions on prop

jeastes1

jeastes1

Location
clark lake, MI
Looking for opinions on what prop to buy. My current set up is
Aquabot V2 fiberglass
SS xscream 865, on second bore
Pfp ran dry
46mm carbs
H2O 148 pump
Skat 13/18
Would like to get the power to come on a bit faster.

Sent from my SAMSUNG-SM-G891A using Tapatalk
 
Blue

Blue

Judging your cheapness
Location
St Cloud Florida
I ran a php 898 with 46 carbs pfp 148 pump with a 10/16 it was dead on. The 13/18 is to big for a 865 with pfp. Try the 10/16 it will let it rev faster to get on the pipe.

Sent from my SAMSUNG-SM-N920A using Tapatalk
 
Proformance1

Proformance1

Liquid Insanity
Location
New York Crew
Long cone is bad as well. Unless you are confusing that with the medium, Didnt know Torrent made a Long cone? The 85 is good, but you will want to measure and possibly bore the steering nozzle. 89mm would be a good starting guess
 
cookn

cookn

Kamikaze
Location
where you live
Agreed I know when I was running a solas 144 and had my bore at 85 on the reduction, I was using a 550 turn nozzle and never bothered to measure it, when I did it was at 85 mm as well, I bored it to 88 and put a stub cone on and it improved low end hit
 
Jetfiend

Jetfiend

Location
PNW
I ran a dasa 5mm 900 TL, race fuel, 48mm carbs and PFP wet with a skat 148mm pump. 12/16 86/89mm nozzles for reference. Ended up with the little "Hershey kiss" cone..

Sent from my SM-G930V using Tapatalk
 
You must log in or register to reply here.
Top Bottom