- Location
- Green Cove Springs FL
Mine measures at 2.5 inches from the tongue of the pole to the top of bar clamp bolts. Risers bars complicate it a bit, depends on how steep you have your steering adjusted. If you have riser bars and original/stock steering settings, the risers might hit the chin pad at full throw. But I would recommend adjusting the steering quicker than that anyway.Will this interfere with mounting stock chinpad?
Will I have to raise pad to not hit steering?
I don't think you will have any clearance issues and if you do, you can trim the chin pad a bit to clear. Or maybe just put a couple washers under it to lift it up a bit. Sorry, not terribly familiar with chin pad on a RN.