Liquid Graffix
liquidgraffix
- Location
- In the shop or on the water
Pipe help???
- Thread starter Liquid Graffix
- Start date
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
It might get to hot without it, Only one way to find out just do short run's at first and keep checking it.
Liquid Graffix
liquidgraffix
- Location
- In the shop or on the water
also.... if i do put a brass fitting for a stinger, i will tap it for a main jet. Does anyone happen to know apx. how wide a main jet is?
Motorheads5
Livin the generation gap
- Location
- ketchikan alaska
I don't think that will be big enough, I used a stainless steel neddle valve off of a bink's spray gun and I can adjust the water flow.
Maybe something adjustable would be easier for you also.
Maybe something adjustable would be easier for you also.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
depending on how much water the head pipe dumps into the exhaust flow will determine whether you need a stinger on the pipe. I would think if that is the case, drying it out and adding a stinger fitting may help performance. Best test, ride it and see.
- Location
- Gulf Breeze, FL
Not sure about the 650 stuff, but I put this Westcoast pipe on a 750 w/ 44SBN & I need water in the stinger. The pipe had two sets of instructions, w/ & w/o. So I had a 50/50 chance. Without water in the stinger it CONSISTENTLY blows exhaust hoses. Learned from experience.
Attachments
Liquid Graffix
liquidgraffix
- Location
- In the shop or on the water
thank you all- i'm just gonna go ahead and add it to be safe.
dbrutherford
Parts Whore
- Location
- Fairmont, WV
You can always plug it or block it off if you feel you don't need it.
Did you decrease the hole underneath that brass plus you have on your head pipe any?
As per the WestCoast instructions, the 750SX did NOT have the stinger fitting and the 650 instructions did. I used to have a copy of them but i mailed them in the mail many years back to a guy and I sent my only copy by accident.
Did you decrease the hole underneath that brass plus you have on your head pipe any?
As per the WestCoast instructions, the 750SX did NOT have the stinger fitting and the 650 instructions did. I used to have a copy of them but i mailed them in the mail many years back to a guy and I sent my only copy by accident.