Power factor lay down waterbox trade for rrp lay down

[Rickjs4l]

Brand new power factor lay down waterbox will not work for my application. Want to trade for a rrp lay down water box the straight pipe one I can add cash on top but the rrp one must be clean.

 

[Big Kahuna]

Why? The RRP does not have any baffles and lets a tremendous amount of water backflow into the cylinders.........

 

[Rickjs4l]

Why? The RRP does not have any baffles and lets a tremendous amount of water backflow into the cylinders.........

This one will not fit for me. There has to be a way to stop the water from going back into the engine. I think I'm going to make a jump in the exit hose to try to stop the water

 

[Big Kahuna]

Putting a hump in the hose will help. Many have had to cut the PFP box down to fit. That is an option also.

 

[McDog]

Can you move the waterbox back any and use bent hose to connect to the pipe? I know those roids are wide as crap. The rrp box is worthless. Seriously dont bother with it. You need the waterbox as high as it can be.

 

[hornedogg79]

Had the same problem in my chan hull. My old welder buddy and I cut the bottom off at an angle. About 1.5" in the front to 0" in the rear and then made a new bottom. It fits perfect now. I do fountains on this ski with no backflow issues.

 

[cpolaris502]

I may be up for a straight trade for my used RRP waterbox. I commented on one of your facebook posts too.

 

[Rickjs4l]

Modified the pfp waterbox I think it will work!!! I hope it will work..

 

[ridetrp]

Can you roll the powerfactor up towards the pole bracket ?

Sent from my SM-N960U using Tapatalk