power factor pipe question

[Harbor]

do you have more info about that .. how i can do this ?

http://www.x-h2o.com/index.php?threads/running-powerfactor-chamber-wet.155188/page-3

Lots of info in threads already, here is one, but there is one on where to drill plus others.

You can see in post #18 in your thread here, last pic, the manifold is drilled and has a capped of spray bar installed. Jetmaniac here on the X sells them plus lots more.

 

[mister_skat57]

http://www.x-h2o.com/index.php?threads/running-powerfactor-chamber-wet.155188/page-3

Lots of info in threads already, here is one, but there is one on where to drill plus others.

You can see in post #18 in your thread here, last pic, the manifold is drilled and has a capped of spray bar installed. Jetmaniac here on the X sells them plus lots more.

nice, thanks you so much

 

[mister_skat57]

I would like to update my engine. I bought the yam 760 last summer does anyone use this engine with the power factor pipe? I need to jetting my carb . I need spec for jetting my carbs. Anyone used this setup.
i need your advise about this ?
thanks

 

[mister_skat57]

??

 

[Big Kahuna]

I believe Chris Anyzeski did at one time. @zeski25

 

[JetManiac]

I believe Chris Anyzeski did at one time. @zeski25

Here you go:
http://www.x-h2o.com/index.php?threads/power-factor-pipe-myth.105028/

 

[mister_skat57]

Thanks

 

[mister_skat57]

Single 44. 125 pilot , 147.5 main , 2.0 n/s 95g spring.

Sent from my SM-G930V using Tapatalk

When you flip with 701/pfp .. you use the stock pump or ?? What your setting for the pump? thank

 

[hornedogg79]

When you flip with 701/pfp .. you use the stock pump or ?? What your setting for the pump? thank

Skat 144 setback, c75 13/18, 65v nozzle

Sent from my Moto G (5) Plus using Tapatalk

 

[mister_skat57]

Skat 144 setback, c75 13/18, 65v nozzle

Sent from my Moto G (5) Plus using Tapatalk

thanks