- Location
- Glenmoore pa
Anyone have the sizes for the 3 O-Rings handy (newest gen PFP)? I'm happy to support our vendors for almost everything, but I prefer to buy things like this in bulk from mcmaster/etc.
Powerfactor Pipe O-Ring sizes
- Thread starter Jcary85
- Start date
- Location
- North East Pa
I did the same as you and bought a bunch of them... They certainly dont last long.
The 2 that go on the PFP V3 pipe are: 75mm OD x 5mm thick
The one that goes into the manifold is: 86mm OD x 5mm
The 2 that go on the PFP V3 pipe are: 75mm OD x 5mm thick
The one that goes into the manifold is: 86mm OD x 5mm
- Location
- Glenmoore pa
Thanks man huge help!
Freakrider
X247
- Location
- Tampa Bay area
Some of us have used an inner coupler on the gen 1 single oring chambers with great results. It seals better and protects the outer coupler better. I've actually had hose clamps slide off and the inner coupler prevents a blow off of outer coupler. Don't see why it wouldn't work on latest gen. @Jyzmbe knows about this too. Bogart use to run this mod also I was told by XS Rick.
Attachments
Last edited:
- Location
- New York
If I know one thing about xs is that they are an American shop. So metic orings might work but they are probably actually some sae size.
