Project_ Freedom_X2

[backflipjason]

This is my first build thread I have ever done.

I bought a x2 hull that has been sitting for 20 years.

My goal is to run with a 701 or 760 Yamaha with a 144 mm pump and mid shaft, and Rear exhaust and much more I will upload some pic later on today.

 

[UKUnicorn]

Any progress on this yet?

 

[backflipjason]

Oh yeah I just need to upload some pic!!!

 

[UKUnicorn]

Oh yeah I just need to upload some pic!!!

So those pictures?

 

[backflipjason]

i know i know lol

 

[smoofers]

 

[UKUnicorn]

Still waiting on those pictures

 

[Big Kahuna]

The excitement is killing me!

 

[backflipjason]

Lol I know

 

[backflipjason]

I will start uploading pic I put this project on hole for a min

 

[backflipjason]

The day I picked her up!!
She was sitting for 20 years !!
No joke
I started by doing a deep cleaning

 

[backflipjason]

Next is mounting the engine and changing the Coupler. I am just going to buy the Rhaas kit it makes it way easier. On the topic of the water box If someone wanted to help idk what water box I want to use. I don’t want the 701 to have to much back pressure if I run a 650/750 exhaust.

 

[jetx]

you can just use the stock kawi X2 box and drill it out, flows just fine imo...have ran this same conversion with the box drilled with a ported yami motor with all the bolt ons.

 

[backflipjason]

you can just use the stock kawi X2 box and drill it out, flows just fine imo...have ran this same conversion with the box drilled with a ported yami motor with all the bolt ons.

Ok sounds good !!

 

[backflipjason]

How many holes did you put?

Ok sounds good !!

 

[jetx]

Easy How To X2 and SX Water Box Drilling - PWCToday

 

[backflipjason]

It won’t let me look at the pics for drilling

 

[Big Kahuna]

You would have to Join PWCToday to view most likely.........

 

[backflipjason]

Thank you! Picking up a water box today !!

 

[Big Kahuna]

Coffman or R&D would work.