Prop for my setup Help!

[Owen18]

I am running a 701 with BB sleeves from watcon. 754cc ported cylinder and and ported and epoxied cases ADA head 35cc domes TL ignition
Looking to put a new 144 mag pump. Buddy of mine has an 8-14 c75 will this prop work for my setup? I am a flatwater rider.

Thanks
Owen

Sent from my Nexus 4 using Tapatalk 2

 

[burton391]

contact impros bro!

 

[Crab]

10/16 Hooker I'm guessing

 

[NVJAY775]

My elevation is between 4,000 and 5,000, but also ride close to sea level occasionally and love the hit of a 9/15 hooker. I'm running the provided cone that came with the solos 144 mag section, but want to test the stubby cone as well. I have to say the hit from the 9/15 is awesome for flat. I'm not ripping across the lake, just want hit for tricks. I had a 10/16 hooker and went back to the 9/15. Also rode a 771 xscream, fbpipe, 144 mag etc... with a 11/17 hooker and i like the 9/15 hooker's bottom hit better.

Even if I was at sea level, I'd be hesitant to run anything taller unless I was slipping the 9/15. It hits really nice.

Just my .02
Others here have more experience than I do, those are just my thoughts.

 

[bungeeguy]

Hey Owen, on the bob gen 2 I had the prop was custom but basically a 9/15. Mag pump and 850 motor. Hit super hard for flat water.

 

[sjetrider]

have you posted here?
http://www.x-h2o.com/threads/131452...-stroker-crank-for-62T-based-motor&highlight=

 

[sjetrider]

$$$$$$ why a hooker in a mag pump, I mean, it will work but why not use the skat mag prop ? I would suggest 12/17 c75 mag, the 8/14 I would think would be too low on bottom but prolly worth a try.

 

[XJCrawler]

$$$$$$ why a hooker in a mag pump, I mean, it will work but why not use the skat mag prop ? I would suggest 12/17 c75 mag, the 8/14 I would think would be too low on bottom but prolly worth a try.

X2 a c75 12/17 with a bit of a cutback