Super Jet Protec pipe jetting stock 62t

[C57 Racing Products]

I'm by no means a Yamaha guy, but I'm working on one for a buddy of mine and I need a jetting recommendation. Its an otherwise stock 62t in a SNSJ running the oem 38's.

I did some searching and found the Factory Pipe jetting and figure this should be in the same ball park. But I wanted to check here and see if anyone could lend me some first hand experience. Thanks

 

[C57 Racing Products]

i got this spec from protec this morning in case anyone else needs it.

130 main jets
70 pilot jets
1.5 needle valves
95 gram springs
1.5 turns out on low speed
2 turns out on high speed