Super Jet Pump/hoses help

Tevonini · Mar 22, 2017

please help lol I bought a project ski (97 round nose) and I went to install/shim the pump and realized the pump only has two places to put hoses, 1 3/8 nipple I'm pretty sure is for cooling but there is a 3/4" nipple on the other side of the pump and there are 2 3/8" hoses that come out of the hull I've never messed with pumps so I'm not sure what the 3/4 hose is on the pump I'm assuming 1 of the hoses coming out of the hull are a syphon bilge but I'm not sure

[/IMG]

Tevonini · Mar 22, 2017

jonolove · Mar 22, 2017

You have two cooling lines on the hull you need to tap the pump and add a brass fitting

Tevonini · Mar 22, 2017

jonolove said:
You have two cooling lines on the hull you need to tap the pump and add a brass fitting

what is the 3/4 nipple for?
are there and forums on where to drill and tap the pump?

erik mx45 · Mar 22, 2017

the one on the right cut off half of whats sticking out for clearance to fit in the hull then tap for a fitting !

Tevonini · Mar 23, 2017

erik mx45 said:
the one on the right cut off half of whats sticking out for clearance to fit in the hull then tap for a fitting !

what size would i tap it? the hole has a 3/4" (.075") I.D. should i just cap the hole? I'm running a stock engine no need for dual cooling at this time. should i cap the hole and drill and tap a 3/8 barbed hose fitting some where next to it?

any one else ever had to deal with this?

jonolove · Mar 23, 2017

Tevonini said:
what size would i tap it? the hole has a 3/4" (.075") I.D. should i just cap the hole? I'm running a stock engine no need for dual cooling at this time. should i cap the hole and drill and tap a 3/8 barbed hose fitting some where next to it?

any one else ever had to deal with this?

Yes you can cap it and run single cooling

Tevonini · Mar 23, 2017

jonolove said:
Yes you can cap it and run single cooling

What do I use to cap it? I would assume there is a lot of pressure there..

jonolove · Mar 24, 2017

I have a bunch of stator for either single or dual cooling u can have one if you need it no worries I'll be heading to folsom in the next week or so

Tevonini · Mar 24, 2017

jonolove said:
View attachment 330573 I have a bunch of stator for either single or dual cooling u can have one if you need it no worries I'll be heading to folsom in the next week or so

thank you! i would really appreciate it, my hull is set up for dual cooling i work nights so I'm usually available all day I'm still young I'm good at adjusting my sleep schedule lol