Q : Factory Pipe Headpipe bolts?

[marz831]

Tell him to use the bolts that hold the stock pipe on the bracket that connects to the head. That's what I did. I guess I could have bitched to the seller...maybe I'll do that next time

 

[Big Kahuna]

there is not one, with the thread size you would end up with a 15mm head, but it takes a special bolt with a 14mm head....... like Marz said, use the OEM bolts, I used some from the bedplate, they work well......... Parrdaddy was fooling around with some socket head (allen head) screws....... Paul may have some also(LPW)

 

[WaveDemon]

Does anyone have any McMaster part numbers for the 3 bolts that hold down the headpipe to the exhuast manifold on the bpipe?

the person that bought my bpipe on ebay is being a baby about this and i need to find 3 bolts and send them to him.

now i remember why i hate selling crap. :banghead:

you should sell me all your stuff. :brap:

 

[SuperJETT]

Just a check, the manifold wasn't helicoiled was it? If/when mine strips out, I'll get all 3 holes helicoiled with a more standard size bolt.

 

[FLY6584]

Hey Edwin PM #.0. He uses the allen head type that BK was talking about.

 

[SJBrit]

there is not one, with the thread size you would end up with a 15mm head, but it takes a special bolt with a 14mm head....... like Marz said, use the OEM bolts, I used some from the bedplate, they work well......... Parrdaddy was fooling around with some socket head (allen head) screws....... Paul may have some also(LPW)

Yup - I'm running Jeremy's Diddy-bolts. They work great and look good too.

 

[Crab]

10mm X 1.25 X 40mm long flanged SS bolts. From FPP website.

 

[madoyster]

LPW has some.

 

[djkorn1]

Thats what I did. :beerchug:

Just a check, the manifold wasn't helicoiled was it? If/when mine strips out, I'll get all 3 holes helicoiled with a more standard size bolt.

 

[Sanford]

I just use the 61x or 62t case bolts. I cut them down slightly but they actually offer more thread to bite into. The original (shorter) bolts don't grab all the available threads and run the risk of stripping (if you R&R many times).

 

[djkorn1]

I've had those too...No more ebay for me.

i'd prefer to.

i'm not good at dealing with these little whiny ass ebay baby bitches.

 

[sjetrider]

Should have sold it here GRRRRRR, but regardles the shorter case bolts will work too I believe.

Does anyone have any McMaster part numbers for the 3 bolts that hold down the headpipe to the exhuast manifold on the bpipe?

the person that bought my bpipe on ebay is being a baby about this and i need to find 3 bolts and send them to him.

now i remember why i hate selling crap. :banghead:

 

[Shonuff]

I've got three great ones in my garage.

PM me his address and i'll mail them to him.

 

[Shonuff]

Don't sweat it, they're just taking up space.

 

[Shonuff]

Can I make the addressee as "Whiney Little Bitch"?

 

[tom21]

:15:

:17:

:haha:

 

[tom21]

saki you should know by now- If Tim doesn't get it first - I will gladly take your aftermarket parts off your hands. so long as you ship in a timely manner

ZINGA!:fest30:

 

[Shonuff]

Sent.

You owe me a Coke.

 

[Idok]

my ebay auction even had a disclaimer about the shipping!

:haha:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230155245066

you know, he did pay with one of those e-check things.

should i be worried about this kid now? crap, i remember some echeck thread a few weeks ago but i never really read it. i just hope this doesnt end up in me getting paypal-ripped AGAIN. :banghead:

until that echeck cleans you have no money! I had a WLB on my case for holding shipment until the e-check cleared :chairshot: