Re: 1991 kawasaki x2 650 Bilge help!

[Twixter]

1991 Kawi X2 650...I need help. Just bought the ski so I'm new to the X2 world or water world at that. I need help on installing a bilge pump! Where can I get a 500gph bilge with all the mounts and wires...I want an on/off switch on handle bars to easy access the bilge pump....also if anyone has any info on how to install it step by step that would be fantastic! Pictures n stuff so I don't f up the ski lol. I want to keep the stock gravity bilge in it so Where would the best place to put the pump and pisser at? (Dual cooling system is taking up both pissers up front) thanks guys! If all possible I want to set this up so that I don't have to have to remove the motor but if I have to I guess i will. KEEP THE X2 ALIVE!

 

[928Engineer]

I'm sure you can find everything cheaper but everything you need minus the mounting bracket can be found here. https://www.blowsion.com/accessories-1-1-1?pagesize=12. You can find the mounts for pretty cheap on ebay but just to show you what it looks like check this site out http://www.atlanticjetsport.com/index.php?l=product_detail&p=1379. Since I haven't installed one I can't tell you where the bracket mounts but it looks like it might bolt up near the impeller shaft. You can use this as your wiring diagram, you won't have a float switch so ignore that.

Two wires on the pump and two from the switch. Read the instructions but one wire from pump to ground, other wire runs to one of the wires off the switch, other wire of switch runs to battery. Hope this at least points you in the right direction.

 

[rojo1227]

http://www.raddudesfi.com/raddudesfi.com/Part_-_Dual_Bilge_Bracket_X2.html

Just put one in mine you will have to pull the motor to do it right without busting your knuckles up .

 

[Twixter]

Thanks guys!

 

[Vumad]

I like the rad dudes bilge bracket, the rest you can get from jetmaniac. The bar mounted switches are expensive compared to the dash mounted ones.

 

[Twixter]

A dual bilge really nessary?

 

[Vumad]

A dual bilge really nessary?

I wouldn't put a dual bilge on a 650sx, but that doesn't mean you can't use the bracket. If there is a single bracket you like, that's fine too. I don't prefer to glue a bilge down.