:dunno:
J jopi X Apr 29, 2006 #2 Base bolts: Red (572) 1st torque all to about 20' lbs then final torque to 29' lbs
Big Kahuna Administrator Location Tuscaloosa, AL Apr 29, 2006 #3 No loctite on Head or cylinder to case bolts, just torque
AIRICCC tubbies is/are the answer Location fort wayne indiana Apr 29, 2006 #6 Mile9c1 said: Yamaha recommends a thread sealant only. Click to expand... not only do they recommend it, they use it from the factory... liquid thread sealant, not tape... not thread locker
Mile9c1 said: Yamaha recommends a thread sealant only. Click to expand... not only do they recommend it, they use it from the factory... liquid thread sealant, not tape... not thread locker
Rickster Matakana Menace Location Bay of Plenty, NZ Apr 29, 2006 #7 Marine grease it is... thanks guys...:hail:
Shonuff I've got the glow Site Supporter Location Memphis Apr 29, 2006 #8 jopi said: Base bolts: Red (572) 1st torque all to about 20' lbs then final torque to 29' lbs Click to expand... Yep, that's what the Yamaha service manual states. LocTite 572 thread sealant. (Red Loctite is 271, btw) Last edited: Apr 29, 2006
jopi said: Base bolts: Red (572) 1st torque all to about 20' lbs then final torque to 29' lbs Click to expand... Yep, that's what the Yamaha service manual states. LocTite 572 thread sealant. (Red Loctite is 271, btw)