Remedy for Squeaky ATP Pole

[tosterland]

I have a ATP pole and ATP pole bracket. It is so noisy and I cant take it anymore. I have tried taking it apart and greasing it and spraying it with WD40. Both of these made it silent for about 15 min of riding then it came right back. Any one have a solid fix for this? I am going to take my pole off/apart tonight to cut my tubes, I would like to cure this issue at the same time if possible.

 

[IS0LD0UT]

Different bushings? Saw a thread about soaking them in fabric softner also.

 

[GabeH]

I had the same problem before. When you take it apart, lightly (LIGHTLY) sand the sides of the bushings where they touch the pole bracket with fine sandpaper.

 

[tosterland]

I have never heard about the fabric softener but I have heard of sanding them. I will try sanding them first. If that don't work I will pull it back apart and try the fabric softener.

 

[kinevac]

please let me know if either of these techniques work I have been wanting to figure out how to stop the squeaking.

 

[tosterland]

I sanded them lightly. I haven't rode it much since then but the little I did have it out it was silent.


Sent from my iPhone using Tapatalk

 

[kinevac]

great thanks