Rev footwells installed/sorta

G

gCASEy200

thought installing these bad boys would be a little easier then it turned out to be.
alot of cutting and fitting and still not completely there, cut threw the pipe with a jig saw the first time around, threw a couple packs of jb weld on it and it hasn't leaked sense.
But the right foot well is tilted up sitting on the pipe, after ripping off my side rail caps, i decided to order another pair.
So fair ive gotten this far
Third picture, is there anyway to get that last piece of the rail cap off without ripping the bumper thing thats riveted in?
4th picture a sub to the bottom of the lake 50ft off my dock
leftfootwell-
http://img242.imageshack.us/my.php?image=pictureorvideo001ar7.jpg

right footwell-
http://img250.imageshack.us/my.php?image=pictureorvideo002ee8.jpg

part of the rail im trying to remove-
http://img461.imageshack.us/my.php?image=pictureorvideo003kw3.jpg

sub to the bottom of the lake-
http://img461.imageshack.us/my.php?image=pictureorvideo004pp3.jpg

teh boat-
http://img523.imageshack.us/my.php?image=pictureorvideo005vl9.jpg
http://img523.imageshack.us/my.php?image=pictureorvideo006gf8.jpg

Had the whole tray turfed over to, but noticed a leak with the left footwell so ripped it all off to start over.
 
Last edited:
G

gCASEy200

i have three choices
cut the exhaust pipe out, add a one way valve, go with front exhaust
level that side of the tray off with padding and leave it
or cut the well just to the pipe, my foot still fits fine, even if its cut down
the first time i glassed them in i was in a huge rush because i was leaving town for some surf riding, so i did a very ********ty job glassing them in, and noticed a leak, so i ripped them out to do it right
gonna ripped the rivets out of the bumper install the new jettrim rail caps, then just use screws to put the bumper back in
 
Last edited:
G

gCASEy200

yeah its waterproof/tight fiberglass silicone i bought from homedepot, sealed it up real nice then layed fiberglass over it all, ill get some pictures
 
G

gCASEy200

Matt_E said:
Go ride. :biggthumpup:
Click to expand...
lol i know, ive just been working on this bitch non stop, its coming out perfect, ill get some pics up later tonight
right footwell after cauk-
http://img256.imageshack.us/my.php?image=pictureorvideo001ic0.jpg

left footwell-
http://img461.imageshack.us/my.php?image=pictureorvideo002ua2.jpg
both of them together
http://img443.imageshack.us/my.php?image=pictureorvideo003wp2.jpg


the cauk worked alot better then i thought it was going to
******** is in there good
time to install the caps and the turf =(
i took the glass off after it dried, just wasn't feeling it think im going to leave it how it is now
 
Last edited:
You must log in or register to reply here.
Top Bottom