- Location
- Long Island, NY
I know guys have done it but my scupper flap on my rickter fr2 is on it's way out. Anyone have pictures of how they put a versaplug max in there
Custom/Hybrid Rickter scupper versaplug install
- Thread starter Gliderskier
- Start date
Just seen that elproffesor has released a versaplug that fits right in the rickter tube(72mm) as i was thinking of buying it myself as my flap is starting to crack.
http://www.elprofessor.fr/en/vide-vite/2093-scupper-ball-xxl.html
http://www.elprofessor.fr/en/vide-vite/2093-scupper-ball-xxl.html
- Location
- Long Island, NY
Wish I saw this before I got a regular max
- Location
- Beausejour, MB
Same here
Proformance1
Liquid Insanity
- Location
- New York Crew
Wow that is a great idea. Every Rickter IMO needs one of these. I was thinking of making one myself but never got around to it. Thanks for the link
- Location
- Wasaga Beach
Looks like a great product. I'll be looking at one of these when my flap goes.
Last edited:
Superjetjim
X-
I run these plugs on my B1, brilliant kit, don't leak and drain really.
New XFS comes with these for tray drains as standard. Main scupper is still flapped, but I might swap to one of these, nice link
New XFS comes with these for tray drains as standard. Main scupper is still flapped, but I might swap to one of these, nice link
Ordered one and now fitted.
link to getting it in.
http://www.pwcforums.co.uk/rickter-scupper-to-versiplug_topic68455.html
link to getting it in.
http://www.pwcforums.co.uk/rickter-scupper-to-versiplug_topic68455.html
- Location
- United Kingdom
Pretty much explains it right there over at pwcuk
shawn_NJ
Chasing waves.
- Location
- Daytona Beach
Here is mine. Super simple install with the smaller surface mount versiplug. Works REALLY good, and ski can float upside-down for minutes before swamping. With the flapper my ski would have sunk in seconds.
What did you use to mount the versiplug R with?
shawn_NJ
Chasing waves.
- Location
- Daytona Beach
Cut out a piece of aluminum sheet with a hole saw to fit where the flapper went. Dont remember the diameter off hand. Then drilled it out to match factory scupper screws. @Breese08SJ had the material and did the super clean install while we turfed the ski. I know other guys did same thing with carbon fiber panels. I'd MUCH rather have the smallest possible drain hole.... for the times the ski gets away from you in the waves and is rolled upside down. Ideally I'd never run any scupper, but for a washout hull drain this is the safest compromise. I'm sure someone could sell these to all the Rickter owners with the automatic-sink flapper still installed.
Superjetjim
X-
Rickter are using Versaplugs as part of the 2015 XFS Competition Ninja hull from the factory, used to drain the foamless tray, seems like a fair endorsement to me..
Been running them on my B1 and RIB for years, work a peach.
Doubt it'll be long before they move to a large one for the main scupper
Been running them on my B1 and RIB for years, work a peach.
Doubt it'll be long before they move to a large one for the main scupper
- Location
- Saskatchewan
Bringing this back from the dead! Did your mini scupper suck exhaust and choke your engine at certain speeds? What model of versiplug is that?
No, the small ones don’t suck in exhaust… I have one on a new ski I have… versa plug “R”
jetmanic sells them…
I still have water in the hull at times…I do still have a working pump tunnel scupper installed too… I think the best solution is to install a stock siphon bilge system, but that can take some doing and expense… .I did it on a buddies ski and his is always dry…
jetmanic sells them…
I still have water in the hull at times…I do still have a working pump tunnel scupper installed too… I think the best solution is to install a stock siphon bilge system, but that can take some doing and expense… .I did it on a buddies ski and his is always dry…
New - 'Water Out' Shop -Bilge Pump, Scupper, Versiplugs, Hood seals, Billet outlets, hose, mounts, etc.
Bilge Pumps, Versiplugs, Scuppers, Hood Seals Keep the Water out of your ski! Bilge Pump kit 123.90 Rule Bilge Pump 360gph Rotary 3 position waterproof bilge switch Billet bilge outlet (black or silver in straight or 45 degree) Bilge outlet hose 2ft. Billet single bilge pump mounting bracket...
www.x-h2o.com
Attachments
Last edited: