Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Didn't think they made them in 2015. The new Edge came out in 15.
RICKTER talk
- Thread starter Idok
- Start date
JT_Freeride
John Tetenes @Jtetenes
- Location
- Long Island
Generally you need 7.5' x 3' x 3' of room
Last edited:
- Location
- Clermont, Florida
- Location
- Disco bay, ca
Are you guys removing scupper first thing or running it for a season or two? Seems silly they would just put a scupper on that make the boat leak.
I've heard good things on those versa plugs though.
I've heard good things on those versa plugs though.
- Location
- Long Island
He used the overall brand Rickter size versaplug
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Location
- Boynton Beach
OVP versiplug style is the easiest to install on rickter scupper tube. Spray the orings with WD40, stick it from inside out. Lock the pinscrews. Done.
No need to remove the stock scupper plate. If you have removed it, check with Thrust. They make both US standard and Rickter size tube versiplug scuppers.
This is the first mode rickter owners should do on their new hulls.
Stock flap scupper never seals 100% and sooner or later will f**k you up.
No need to remove the stock scupper plate. If you have removed it, check with Thrust. They make both US standard and Rickter size tube versiplug scuppers.
This is the first mode rickter owners should do on their new hulls.
Stock flap scupper never seals 100% and sooner or later will f**k you up.
- Location
- Clermont, Florida
dmpus are you talking about the versiplug max ?
- Location
- United Kingdom
Anyone have the TI rickter scupper? I was on a Xfs this weekend with no bilge in big surf and made it out ok. Ball scupper would be much safer than the flap I reckon.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Location
- Clermont, Florida
I bought one but it doesn't fit quite right in my edge the angle of the tube against the back of the ski keeps the back plate from laying flat. That's why I'm trying to sort out another option I'm probably going to do exactly what Sean in Jersey did and put the scupper ring back on make a round aluminum plate and put a versa plug R on it
Sent from my SAMSUNG-SM-G900A using Tapatalk
Sent from my SAMSUNG-SM-G900A using Tapatalk
JT_Freeride
John Tetenes @Jtetenes
- Location
- Long Island
If you have a rickter buy an OVR scupper not a versiplug.
- Location
- Clermont, Florida
Where do i get one !
Sent from my SAMSUNG-SM-G900A using Tapatalk
Sent from my SAMSUNG-SM-G900A using Tapatalk
- Location
- Clermont, Florida
Sorry meant to hit the?
Sent from my SAMSUNG-SM-G900A using Tapatalk
Sent from my SAMSUNG-SM-G900A using Tapatalk
Anyone in the usa sell them?
JT_Freeride
John Tetenes @Jtetenes
- Location
- Long Island
Not sure if anyone in the US sells them but I ordered 3 of them and had them at my door in 3 days.
http://overallbyfredo.com/ovpart/ovpart-clapet.html
http://overallbyfredo.com/ovpart/ovpart-clapet.html
boostedegos
JLA
- Location
- Northwest Indiana
I also ordered from the link posted above and also had it in hand in just a few days.
The OV scupper fits perfectly. I actually left the scupper flap on the back intact and slide this in from inside the engine bay. You would never know it is there and my hull stays dry. Prior to installing the OV scupper, the flap let in quite a bit of water even though the hull was brand new.
The OV scupper fits perfectly. I actually left the scupper flap on the back intact and slide this in from inside the engine bay. You would never know it is there and my hull stays dry. Prior to installing the OV scupper, the flap let in quite a bit of water even though the hull was brand new.
MarkWalker
Site Supporter
- Location
- Buffalo NY
I bought my Overall scupper from Jet connection in California. It was $80+$10 for shipping. I installed it behind the flap, as a back up to the flap scupper. His contacts are, jetconnection1@cs.com Phone 415-899-1753. His name is Philip. They take Visa and MasterCard, no PayPal. Hope this helps.