RIVA red pipe in an SJ HELP!

[madd_dips]

Trying to install a red pipe i had laying around on my sj and i have no idea how to install the water lines... There are 2 water inlets on the hull of the ski. one on the right side and one on the left.(when standing on the tray). Then theres 3 fittings on the pipe and 1 fitting on the exhaust mani.Runing single cooling. Can someone help me please set up my water lines please! I need to know how to hook up everything. From my head to all my exhaust and my pisser. Thanks guys

Sean

 

[SXR-FOREVER]

I'm not sure about the dual cooling but this is how Riva told me to set up mine with the single cooling...

1. water supply to the exhaust manifold

2. cylinder head fitting to the fitting at the top of the waterjacket

3. the bottom fitting on the water jacket goes to a pisser out the side of your ski.

4. T in the stinger fitting at the front of the pipe to the water line in number 3. (the one that goes to the bypass out the side of the hull)

 

[BombThreat]

for dual cooling do what he said but then also tap the top boss on the manifold and have the 2nd cooling line in there and then you need to add another water outlet on the stock head and have it go to a pisser (drill and tap the tiny fitting on the front of the head).

 

[kcr357]

re

http://www.pwctoday.com/f14/riva-red-pipe-water-routing-18646.html

 

[Mdavies_02]

Don't mean to steal this thread, but does anyone know the jets required for a Riva red pipe?

Dropped one into my SJ last week, and was hoping I could get away without rejetting.

 

[Moped150]

for dual cooling do what he said but then also tap the top boss on the manifold and have the 2nd cooling line in there and then you need to add another water outlet on the stock head and have it go to a pisser (drill and tap the tiny fitting on the front of the head).

How do I tap the top bung on the manifold. Do I just drill threw with the right size drill bit or have to have some one machine it. What size fitting do I use also.