Super Jet Rn pole on a squarenose bracket question!

[FyrHazard]

It's made to the same thickness my stock bracket was. It's possible different years were a little different. Just bend the hooks down a bit, and it should seal up.

 

[motoman3000]

It's made to the same thickness my stock bracket was. It's possible different years were a little different. Just bend the hooks down a bit, and it should seal up.

FWIW, I have a '93 SN hull. I agree, its a small winter project. If they're still available grab 1! The qualiity in craftsmanship is top notch!

 

[Roseand]

Well I ended up going the hazard bracket route! Snagged up a black anodized one, and it's the newest version with the spring slot instead of a hole. I got a blowsion spring with it too, so I'll probably use that, and crank on the pole bolt so I have a weightless pole.

What are you guys doing for backing plates? I've got the two small separate ones. I'll be reinforcing the bottom of the pole mount, but I'd think a bigger backing plate would help alot too.