Freestyle RRP Billet Electric Box?

[Superjetjim]

Has anyone built one up yet? Mine has arrived, despite the price tag it has zero instructions on where the ferrules go and how to mount up the parts. Here's how far I've got so far, problem is the lower coil sits to high to fit the lid because one coil base sits on top of the other!

Hopefully I'm missing something simple?

 

[ProSouth]

Can you grind down the middle mounting point? Kinda gay to have to do that.

 

[burton148]

Swap the wires where they come out on the box or try running the lower coil wire under the top coil. Possibly?

 

[Matt_E]

Swap the wires where they come out on the box or try running the lower coil wire under the top coil. Possibly?

The problem seems to be the mounting point for the coil, not the wire.

Ferrules typically go on AC power wires to absorb RF emissions. I'd put them on the plug wires.

 

[Superjetjim]

The problem seems to be the mounting point for the coil, not the wire.

Ferrules typically go on AC power wires to absorb RF emissions. I'd put them on the plug wires.

Matt,

Yes it's the mounting height of the coil that's in question - when I say 'ferrules' I'm talking about Ali spacers (basically a little bit of Ali tubing that the bolt goes through to act as a spacer)

 

[Superjetjim]

Can you grind down the middle mounting point? Kinda gay to have to do that.

Nice idea, but the mounting lugs are threaded to take the bolts so I can't do that?

 

[Superjetjim]

Some additional pics... See how the coil is too high?

How they are mounted - there are only 3x coil mounting holes not 4x!

 

[ProSouth]

you COULD. i dont have this thing in my hands so dont assume i know what im talking about, i hardly do. i cant tell how deep the threads are. could you take the coils off and take some pictures?

 

[ProSouth]

yeah!!! grind some of that thick ass coil off too. grind a little off of the coil, just in the middle where they mount together.

 

[tightithrash]

id give TC a PM. maybe he can help.

 

[Superjetjim]

Just had a thought... If I flip the bottom coil over it should slot into the gap from the other coil?

 

[DangerBoy]

you need to flip one of the coils over so they nest, than it will all fit no grinding required
Db

 

[just joe]

MSD told me (a couple of times now) to separate the coils from the brain as far as reasonable possible to avoid interference. Is this really a concern? Seems like a lot of people run coils very close to the brain.