RRP flat head bolts

Kny21

Kny21

Location
Delaware
The flat head socket cap bolts that are used with the billet pole and foothold brackets with conical washer... also used with 7/8 bar clamps on just about every turn plate made.

Is there a special name for these? They seem to have larger heads vs regular flat heads I can source locally. Looking on McMaster there's a 100* version but they don't make them in metric, and not even sure they would be the same if they were.

So really looking for the name to search and where to get them besides the obvious $$$ route.

Thanks,
 
augustaf

augustaf

Location
central florida
Here about these fasteners are called "shcs, flat (head)"- socket head cap screw, flat (there is also button head and std. head) the thread size is M8- 1.25, if handle bar retaining.
 
Kny21

Kny21

Location
Delaware
So you're telling me these are just run of the mill flat socket head cap screws?

My local TrueValue only stocks up to M6 in flat shcs so I haven't had to personally check larger sizes but the M6 aren't the same size head as what is used on the RRP pole so I was just figuring they were all a special variation as that's something RRP would do.

Wanted to check before I ordered anything from McMaster only to find I wasted $ on the wrong stuff.
 
You must log in or register to reply here.
Top Bottom