rrp ninja footholds on a krash

[erik mx45]

anybody install these and use them on any a krash jetski
if so how do you like them over krash stock ones etc? thanks

 

[SmittySX]

I wish I would have gone through with this on my footrocket. The footholds that it had were the WORST. Get the ninjas and never look back.

 

[Yami-Rider]

I wouldn't say they are the worst, but the track system isn't the best design.
As long as the gunwales are solid, it'll be a direct bolt on after you drill the holes.

 

[Ochocoronas]

You have to drill a new hole. Problem was the bolt can't fit where you have to drill the hole. You will need a longer bolt and a lock nut and go from the back side of the hold then cut the bolt flush. You may need to sand the front side some to get the nut to fit. I like the Ninja holds much better.

 

[Jet_jase]

Most of the guys riding Krash hulls in the UK have gone with RRP Ninja's. Agreed the Krash holds are terrible IMO.

 

[Yami-Rider]

I thought he was talking about going with the whole rrp setup? I would want to get rid of the track system.
I like my krash holds, but I spent hours on redesigning the padding setup to fit my feet perfect.

 

[erik mx45]

the new 50cal foothold dont seam to bad i did cut off the wrap around ears so far to test !