Freestyle Rrp pole wayer

[handshy13]

I have an rrp cast pole on my sj rn im getting alot of water through the tubes into yhe hull any fixes

 

[OCD Solutions]

Not really a fix but I have to ask what you are doing that your pole ends up being underwater so much?

 

[handshy13]

Freestyle flips rolls subs if i jump high the ski lands deep in the water i was thinking something like the prefilters for the flame arrestors

 

[subhard]

Maybe try getting rubber stoppers the same diameter as the tubes. Drill/cut bypasses for your lines then wedge them up your tubes. Just like a stock pole.

 

[Jetfiend]

^ Plugging the tubes might also stop the intake air from getting in

 

[handshy13]

Yeah im running a dasa1098 10 mill stroker when i hit the throttle it sucks the hood down from the air intake

 

[subhard]

Oh wow hmm. Ya all I saw was that you had a superjet which nine times out of ten breathe more than enough through the hood. So obviously that wouldn't work lol. I know you can make extra breathers pretty easy on Sxr hoods, what about sj? Or you could get an aftermarket hood with bigger vents (if you don't already have one). Just spitballing here...

 

[handshy13]

I think I'm going to try the outwears

 

[XJCrawler]

Outerwears suck! When they get wet they restrict air flow and take awhile to dry out.

 

[handshy13]

I dnt know what else to do

 

[badvinny]

And better intake like the fx1 Thrust kit.

 

[OCD Solutions]

Are you 100% positive that's where you are getting your water intrusion? I have an RRP pole on both my skis and I have to get tumbled or thrash around for a long time before I get any water to speak of and even then, a single pump takes care of it pretty quick.

Edit: I don't have scuppers though. Scuppers let the air out in some positions and water may very well flow down the tubes.

 

[handshy13]

Yes i have bought every hood seal that is made have an oem seal on now i filled up my hull with water hose no leaks ran it on tve trailer in the water no leaks powerwashed it no leaks