Second Drain Plug under the Exhaust

[bird]

I've seen Bullet Hulls with two drain plugs, one on each side. The Stock SXR Exhaust outlet is very large and would have to be modified for the drain to fit under it.

The Benefit is the SXR sidewalls and tray are "Wet". Water can get stuck on the right side of the hull and never drain out. I'm running a Versi-R plug in the stock location on the left and love it, I want to do the same on the other side.

Chime in. My searching showed nothing via Google.

 

[Big Kahuna]

you could add a brass fitting with the plug. These are small. Drain after you ride and pull ski from the water.

 

[VXSXH20]

Here yah Go Bird... I cannot find the pic of mine when I installed it. but basically Watcon sell them as a set. its a course threaded brass sleeve or insert. Theyre often called face bushings or reducer bushings. but it will be hard to find the size small enough in the plumbing world. also the inside threads of watcons are metric which is nice and you get a stainless allen head socket head. here a few pics of a carbon fx1 hull that a guy just put them in. they are small for the purpose of going under the exhaust pipes. Octanes had a problem of wet trays and these were made to aid in the drainage of them. but they fit anything

 

[Quinc]

I just bumped a thread where a guy was using rc boat drains. They are small, stainless, and cheap.

 

[VXSXH20]

Post them up! I'd be interested in seeing more info please

 

[Jetfiend]

I just bumped a thread where a guy was using rc boat drains. They are small, stainless, and cheap.

Please post the link.

 

[Quinc]

http://www.x-h2o.com/index.php?threads/how-to-refoam-a-bob-gen-2-hull.155175/

 

[Vumad]

http://www.x-h2o.com/index.php?threads/how-to-refoam-a-bob-gen-2-hull.155175/

http://www.funrcboats.com/ProductInfo.aspx?productid=AER7008