The hull is a -2 Superfreak Badass with a carbon hood. When i bought the freak from fast elements it had all those green Fast elements logos all over it and my original plan was to remove all those stickers, remove the turf, have it painted, rebuild it for the spring time. But after every one of my friends decided i should build it for daytona, here we are. The hull is in great shape after i peeled off all the stickers and spent three days with 1000 grit sandpaper wet sanding it to remove most of the belmishes, then went back over it with 1500, then 2000, then last with 2500 and then hit it with a high spped buffer. Beside the stress cracks in the gel, i found not one structural crack or anyhting. So the new plan is to ride the ski as it is this summer since the turf is still in pretty good shape, and the paint didnt turn out bad at all, then re build and repaint next summer. Im still waiting for my xmetal pole setup, and my internal fill to come in, i have everything else thanks to my trusty old square!
After getting a box of parts from Jetmanic that my square couldnt donate i started my build. So far i have the pump in and aligned, thrust trim all set up, midshaft in, motor mounts in, bilge glued down, and not im working on the ride plate fitment. My plans for today is the have the pump area complete and sealed up, and have the two big breather holes filled up where the original owner had a rrp pole set up on it, and maybe have the motor in and aligned. I will get some pictures along the way and post them as well! If my other parts come in today or tomorrow, Prosouth, x2ufoolz, and myself are going to pull a few late nights this weekend and get her finished up and then go out for a test ride in the chilly GA lakes before making the trip to daytona motosurf!
