- Location
- Austin
Good prop for my superjet? Cant seem to find anyone running it. Is it worth $100?
Skat swirl 13/18
- Thread starter Jksuperjet
- Start date
Blue
Judging your cheapness
- Location
- St Cloud Florida
It's a good prop but maybe to much for a stock sj but for a ported motor with a pipe it's fine.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Sent from my SAMSUNG-SM-N920A using Tapatalk
- Location
- Austin
Thats what I like to hear. I will eventually grow into it!
Blue
Judging your cheapness
- Location
- St Cloud Florida
Yes if it's to big for ur current setup put a washer behind it and loosen it up a bit. A stubby pump cone or bored nozzle works good too if it's to big.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Sent from my SAMSUNG-SM-N920A using Tapatalk
- Location
- Austin
Good deal! Thanks for the help man, pulling the trigger on it now!
I would put your $100 towards the correct impeller.
- Location
- Long Island
make sure its not worn out and needs a resize for $125
- Location
- Austin
What would be the correct one?
It says brand new. I figure if its not, or the pitch is too much I can just send it to impros ($50-100) and it will still be cheaper than buying a new one. http://impros.com/store/index.php/services/impeller-service-pricing.html
Blue
Judging your cheapness
- Location
- St Cloud Florida
The prop is worth $100 if its new. They sell for $250 new. If ur running a bone stock sj a 9-15 hooker works great. However if you port the motor or add a pipe the 13-18 skat is a good choice but only if ur going to add a little more power otherwise it may be to much for a stock sj.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Sent from my SAMSUNG-SM-N920A using Tapatalk