FX-1 ski wont start !

[NJrider]

When i hit my start swich on my ski nothing is hapening it wont even click my battery is good. Just put a new start seloniod in i can jump the seloniod and it will fire up. just wont start with the swich , wich i checked to see if it is good and got it to start my blaster with no problem. could this be a ground problem, or is there something i am over looking. Any help would be great thanks guys.

 

[crashski]

Re-check all your grounds in your Ebox you probably have one lose or not connected all the way

 

[special fx]

definitely check your grounds....I'd start by using a ground jumper from your battery to the engine case to eliminate the possibility of the main ground cable being bad. Lot's get burnt/melted by the pipe and then corrode. It's a real quick easy thing to check if you have a jumper cable.

 

[NJrider]

thanks for the advice. The Ebox is spotless and everythign is perfect. Found a part in the posotive wire on the switch that was shrink wraped and had corosion ,cut the bad part off conected them back together e taped and covered in silocone good to go. Thanks again!

 

[demolition_x]

That sucks happened on your first ride out. I know my ground cable is all jacked up from my pipe. Even though you tried the kill switch it sounds like it could be something in that circuit.

 

[NJrider]

yeah, figured it all out. Nice meeting ya bro and thanks alot for the tow in!:beerchug: