joe b
depth tester
- Location
- northfield, nj
2005 catalog says 155.00:smile:
hangtime
Speak up ,don't kiss azz
- Location
- WORCESTER,MASS- HAMPTON N.H.
joe b said:
not for the carbon fiber plate .:cool2:
joe b
depth tester
- Location
- northfield, nj
:dunno: Can't believe everything you read. That's what my catalog says:boggled:
hangtime
Speak up ,don't kiss azz
- Location
- WORCESTER,MASS- HAMPTON N.H.
joe b said:
Here's the add from their website .$238 plus shipping
http://www.blowsion.com/detail.asp?PRODUCT_ID=YASJCO699
Y
yamaslut
Guest
T-bone said:
Pancaker painted it..... not sure bro
Y
yamaslut
Guest
Thanks for the replies guys.... can't wait to try em out!!!!!
....and no they aren't copies... I wouldn't do that to my friends at Blowsion... a buddy of mine gave me his old ones off his last hull... They were take offs (removed from a hull).... Thanks Robert :hail:
....and no they aren't copies... I wouldn't do that to my friends at Blowsion... a buddy of mine gave me his old ones off his last hull... They were take offs (removed from a hull).... Thanks Robert :hail:
IceRocket1286
Site Supporter
- Location
- Metro Detroit
I thought most guys used 3m5200 to hold them on. Joe kenney does. Alot of my buddies with SJ's and octanes also use 5200, works the best, no grinding, no epoxy mess, and no fiberglass. Whatever floats ur boat.
Takeastand SJ
R.I.P. 8/9/2008
- Location
- Washington
IceRocket1286 said:
Dok is one of the best in the business, he also does Kenneys boat. I'm sure slut will be ok.
Y
yamaslut
Guest
IceRocket1286 said:
epoxy and glass floats my boat just fine "ice ice baby"
do you have a clue????:banghead: :banghead: :banghead: :banghead: :banghead:
I have yet to meet someone that has used 5200 to put them on
IceRocket1286
Site Supporter
- Location
- Metro Detroit
yamaslut said:epoxy and glass floats my boat just fine "ice ice baby"
do you have a clue????:banghead: :banghead: :banghead: :banghead: :banghead:
I have yet to meet someone that has used 5200 to put them on
Yes, I do have a clue. And in fact, they stay on fine. Ive got 3 sets on my friends skis that have yet to come off after alot of riding. Joe kenney does it, and it was even in the instructions.
They both work. and dont ever call me ice ice babay, unless ur gay, cuz thats exactly how it sounds. thanks!
Y
yamaslut
Guest
ok..... sweetheart
btw - nice shot of ya....
http://www.ryanbuck.com/Images/front.gif
btw - nice shot of ya....
http://www.ryanbuck.com/Images/front.gif
IceRocket1286 said:
Y
yamaslut
Guest
geraban19 said:
read what I posted above in the italics... Blowsion has a fix to make 1's handle like II's..
IceRocket1286
Site Supporter
- Location
- Metro Detroit
edit:nevermind
Last edited:
hangtime
Speak up ,don't kiss azz
- Location
- WORCESTER,MASS- HAMPTON N.H.
I put mine on with 5200 according to Blowsion directions .
A lot easier than epoxy and more flexible than epoxy .
I did use West Systems to flair the edges all around the tubbies after but Blowsion told me on the phone to use 5200 so I trust the people who made them for sure .
Obviously West Systems is a more permanent result but as long as you seal the front and bottom leading edges it's good .:cheer:
using 5200 was easy and if you use a latex glove with a little acetone you can rub your finger on the bit that squeezes out and smooth it out perfect .
Seriously, some guys put these on with silicone .My R & D front sponsons were put on with silicone and I had a hell of time peeling them off to make way for the tubbies.
A lot easier than epoxy and more flexible than epoxy .
I did use West Systems to flair the edges all around the tubbies after but Blowsion told me on the phone to use 5200 so I trust the people who made them for sure .
Obviously West Systems is a more permanent result but as long as you seal the front and bottom leading edges it's good .:cheer:
using 5200 was easy and if you use a latex glove with a little acetone you can rub your finger on the bit that squeezes out and smooth it out perfect .
Seriously, some guys put these on with silicone .My R & D front sponsons were put on with silicone and I had a hell of time peeling them off to make way for the tubbies.
IceRocket1286
Site Supporter
- Location
- Metro Detroit
^^^see, looks like i do have a clue there yamaslut:haha: :haha: :Banane01: :Banane01: :arms: :woot: :biggthumpup: :beerchug: :beerchug: :djsmilie: :cheer: :cheer: :cool2: :bow28: :bow28: :bow28: :Banane09: :bow28: :bow28: :spankme: :jester: oke: :spank: :smashfreakB: :smashfreakB: :Banane26: :stups: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :dead: :dead:
oke: :spank: :smashfreakB: :smashfreakB: :Banane26: :stups: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :nana: :dead: :dead:
Last edited:
Y
yamaslut
Guest
IceRocket1286 said:^^^see, looks like i do have a clue there yamaslut:haha: :haha: :Banane01: :Banane01: :arms: :woot: :biggthumpup: :beerchug: :beerchug: :djsmilie: :cheer: :cheer: :cool2: :bow28: :bow28: :bow28: :Banane09: :bow28: :bow28: :spankme: :jester:
I never said your way was wrong, my friend... Just razzing ya a bit for the comment you made "Whatever floats your boat"
:27: :27: :27: :27: :27: :27: :27: :27: :27: :27: :27: :27:
I still prefer the epoxy method for durability... :biggrin:
IceRocket1286
Site Supporter
- Location
- Metro Detroit
whatever floats ur boat is fine with me ,as long as it still rips! weeeeeee
Idok
F1pro
- Location
- Nations oldest muthaF+++kin city
what has never been mentioned here though is the RIVET factor!
ducking and running
ducking and running