masterblaster
X-H2
who sells these now? cant find him here.I get random click from mine, anyone else have this happen on older ones?
Surfriding smitty module for total loss
- Thread starter masterblaster
- Start date
- Location
- the jetski grave yard
you mean shifty mod? I had one give me problems when it got wet. wouldn't spark. days later it would dry out and work again. got sick of it and cut it out. not one problem since I removed it, but I do have to take off a battery end when i'm done riding so it don't drain battery
- Location
- Redondo Beach, CA
Shifty module, Thrust has them. Mine works great!
http://www.thrustinnovations.com/ignition-c-18_21/shift-module-p-543.html
http://www.thrustinnovations.com/ignition-c-18_21/shift-module-p-543.html
- Location
- central florida
Mine has been working flawlessly for 7 years. It is however in a watertight enclosure with the MSD module.
Christian_83
Xscream
- Location
- Denmark
Mine crapped out after 7-10 hours use in enclosure, 3 years ago. Hard wired now FTW.
N3vrSat1sfied
Military Member
- Location
- Fort Worth, TX
I just had one go out after about 50 hours. Start button would start ski with no teether. It also killed my battery. So if you run one make sure to have a quick disconnect on your battery or pull the fuse to brain.
masterblaster
X-H2
Mine is in Dry box also, Even my large lith batt runs dead after few hours,worth it to save some batt life while ski is off
masterblaster
X-H2
this would be start stop issue rather than solenoid wouldnt it?
Buzzard, guess one relay with multiple contacts makes starter relay contact but not the ign on contact. Mine still clicks when the off button is pressed,but wont engage the starter relay
N3vrSat1sfied
Military Member
- Location
- Fort Worth, TX
Negative. Switch tested perfect. I replaced shifty mod and all was well.
Sent from my iPhone using Tapatalk
masterblaster
X-H2
there are quite a few contacts in the module,makes me think about hard wiring start stop myself.
Christian_83
Xscream
- Location
- Denmark
I opened up my shifty module, its a 12VDC self latching relay, so it should only hold ignition on, when you hit start button. The idea is great.
I got fed up, when mine crapped out that fast, a day at the lake with 30deg C weather, and a enclosured box with MSD, that require you pulled engine out - just to pull out the module and run hardwired. No issue since.
I used to run wing nuts on my battery so you could change battery with no tools.
Also i run a MotoBatt mbtx9u 9ah battery and a 5ah Li-ion battery. Both battery will last around 30L of fuel, a good day of riding.
I got fed up, when mine crapped out that fast, a day at the lake with 30deg C weather, and a enclosured box with MSD, that require you pulled engine out - just to pull out the module and run hardwired. No issue since.
I used to run wing nuts on my battery so you could change battery with no tools.
Also i run a MotoBatt mbtx9u 9ah battery and a 5ah Li-ion battery. Both battery will last around 30L of fuel, a good day of riding.
masterblaster
X-H2
same deal here,pulling motor to get dry box out is pain,but worth it to keep everything including coils dry. Mine lasted years
- Location
- central florida
I had just assumed it was solid state , not a mechanical relay- now I'm worried. It looks like a latching relay presumably used on a car with a folding top.
Christian_83
Xscream
- Location
- Denmark
Its not, coil relay. Double latching i think its called.
mike b
Michael "Mayhem" Bevacqua aka MikeyChan
- Location
- California
My ski has the shifty module and last ride I had issues of the ski clicking when hitting the green button but turning over other times. Now it mainly clicks and doesn't turn over the motor most times. Not sure if its the shifty mod or my starter relay though. What did you guys experience when your shifty mod went out? I have already went around the starter and the switch so figure its the shifty mod or relay at this point
- Location
- central florida
Here's a heavy duty one- but you would still put it into a sealed enclosure. http://www.mouser.com/ds/2/418/NG_DS_V23130-X0000-A001_0612-844286.pdf