chixwithtrix
Addicted
- Location
- Houston
Getting hip/pelvic surgery, not going to be using for a while.
Started life as a stage 2 kit, but I replaced the Kavinci pump and trim setup with stainless 148 setback Torrent pump and RRP trim, quality Yamaha components. Quality Yamaha based engine.
-Group K 845
-Factory Pipe B pipe with limited chamber, ported matched to cylinder by Group K
-Assembled with brand new 144 Mikuni carbs
-H2O Designs 3gal tank w/built in battery holder
-Torrent Setback 12 vane 148mm SS MAG pump setup for dual cooling
-Setback SJ driveshaft
-Medium billet pump cone
-Skat D-75 Big Hub Impeller
-RRP 144-148mm complete trim system
-OEM SJ midshaft housing
-OEM pump shoe and seal
-OEM RN midshaft
-ADA coupler
-OEM mounts
-Fresh ebox rebuild when assembled
-Fresh starter & bendix this season
-OCD Solutions plug wires
-OCD Solutions tidy bilge wiring
-Rule 500 bilge pump
-Replaced faulty hood seal with formed silicone seal. Looks ugly, but actually works.
-Versiplug
I put over $16k into the build. As always there are a ton of small parts that went into it like inserts, carbon matte, straps, etc etc
SOLD
Located in Houston Texas.
Shipping and crate at buyer's expense.
One of the most fun skis I've ever ridden, especially in surf.
Started life as a stage 2 kit, but I replaced the Kavinci pump and trim setup with stainless 148 setback Torrent pump and RRP trim, quality Yamaha components. Quality Yamaha based engine.
-Group K 845
-Factory Pipe B pipe with limited chamber, ported matched to cylinder by Group K
-Assembled with brand new 144 Mikuni carbs
-H2O Designs 3gal tank w/built in battery holder
-Torrent Setback 12 vane 148mm SS MAG pump setup for dual cooling
-Setback SJ driveshaft
-Medium billet pump cone
-Skat D-75 Big Hub Impeller
-RRP 144-148mm complete trim system
-OEM SJ midshaft housing
-OEM pump shoe and seal
-OEM RN midshaft
-ADA coupler
-OEM mounts
-Fresh ebox rebuild when assembled
-Fresh starter & bendix this season
-OCD Solutions plug wires
-OCD Solutions tidy bilge wiring
-Rule 500 bilge pump
-Replaced faulty hood seal with formed silicone seal. Looks ugly, but actually works.
-Versiplug
I put over $16k into the build. As always there are a ton of small parts that went into it like inserts, carbon matte, straps, etc etc
SOLD
Located in Houston Texas.
Shipping and crate at buyer's expense.
One of the most fun skis I've ever ridden, especially in surf.
Last edited: