- Location
- Charlotte, NC
Listing my rockered, shortened 96 superjet hull.
--Carter b rocker nose with splashguard added.
-blowsion tubbies glassed in
- complete engine reinforcement and hood seal area with 3 layers 8oz twill.
-Front fuel fill
- wide tray with tigercraft adjustable footholds and pancake pete front foothold. Turf has 2 seasons on it.
- includes stock, flush cut rideplate
- blowsion lowered handlepole mount.
- versiplug max scupper
-watcon hoodseal.
No pump shoe as I was running a kavinci pump that has it's own shoe.
The tray leaks somewhere but there are drains. The tray was cut open by previous owner and refoamed with closed cell foam sheets from home depot. I reinforced the tray area when I put the adjustable footholds in. Includes stock hood and nose piece. I also sanded complete ski down to the gelcoat and repaired any cracks in the gelcoat. Had 10 coats of paint! Haha I did the turf, footholds and reinforcements in early 2020. Engine bay has 2 coats of bilgekote. Ski is located in Charlotte NC and does have a title. $2500 plus shipping. I would be willing to meet halfway up to 5 hours each way for a little extra.
This is a very capable hull for a boat chaser or surf ski. Will flip and roll with ease off a boat wake with a basic 701 61x setup. I did my first flip in the surf on this ski. Its been a good one and hate to sell it but I have no room for it and need funds for my next hull. Original build thread: https://x-h2o.com/threads/make-superjets-great-again.180804/
Feel free to message with any questions
--Carter b rocker nose with splashguard added.
-blowsion tubbies glassed in
- complete engine reinforcement and hood seal area with 3 layers 8oz twill.
-Front fuel fill
- wide tray with tigercraft adjustable footholds and pancake pete front foothold. Turf has 2 seasons on it.
- includes stock, flush cut rideplate
- blowsion lowered handlepole mount.
- versiplug max scupper
-watcon hoodseal.
No pump shoe as I was running a kavinci pump that has it's own shoe.
The tray leaks somewhere but there are drains. The tray was cut open by previous owner and refoamed with closed cell foam sheets from home depot. I reinforced the tray area when I put the adjustable footholds in. Includes stock hood and nose piece. I also sanded complete ski down to the gelcoat and repaired any cracks in the gelcoat. Had 10 coats of paint! Haha I did the turf, footholds and reinforcements in early 2020. Engine bay has 2 coats of bilgekote. Ski is located in Charlotte NC and does have a title. $2500 plus shipping. I would be willing to meet halfway up to 5 hours each way for a little extra.
This is a very capable hull for a boat chaser or surf ski. Will flip and roll with ease off a boat wake with a basic 701 61x setup. I did my first flip in the surf on this ski. Its been a good one and hate to sell it but I have no room for it and need funds for my next hull. Original build thread: https://x-h2o.com/threads/make-superjets-great-again.180804/
Feel free to message with any questions
