Hello X Peeps! Still have any of the OG's still here?
I'm moving out of my place here in GA, and going full time RV. I can't take my ski stuff with me so everything has got to go.
My plan is to sell everything you see and listed here at once. $9500.00 takes it all!
Red Ski: 1995 Superjet in a 90 hull. I have the vin plate and bill of sale for the hull.
Stoyer Hull: My original 95 Superjet bottom deck. I have the cert of origin, but no idea what happened to the vin plate.
All 3 hulls have the usual cracks scratches and dings you would expect, but all ridable as they are. Expect some fiberglass work if you like a flawless hull.
The red ski is in running condition and runs very well.
Motor: "Built by Paul Lehr LPW"
701 with LPW Shredder Port, Gen1.
61X bottom end with new oem crank.
ADA Girdle Billet Head.
Factory Pipe W/ Limited chamber.
Wet Jet Intake manifold.
Carb- 44 Mikuni.
Lightened flywheel.
Hull:
90 Square with modified hood, and nose piece.
Wamiltons 1st gen footholds.
Through hull one way scupper.
Jet Dynamics ride plate and intake grate.
Skat Trak prop.
Handling:
AC Racing aluminum handlepole.
UMI steering with 7 deg bars.
X Metal finger throttle.
Stoyer Hull: Empty
Watercraft Factory Carbon top deck and hood.
X Metal Handle Pole and Pole bracket.
X Metal steering and Handlebars.
550 Hull: Empty/Pole and bars
550 Motor: IJSBA 550 Limited class set-up. (PJS Head, port clean-up, Timing advanced, minor carb mods.) It was running when I pulled the motor in 1996. No promises now. lol
650 Motor: Incomplete and needs rebuild or part out.
300 Motor: Incomplete and needs rebuild or part out.
2 rolling Shop/Work Carts.
2 MMF Water/Scissor stands.
Other Parts:
2- 44 Mikuni Carbs.
Anodized billet drive couplers.
2 X Metal Scupper valves.
Hydro-Turf Handle Pole Pad.
Jettrim 550 nose/hull brackets with original hardware. (extremely rare)
UMI Steering Plate.
Bunk Mates unopened. (set of 6)
5 CDI's oem and protec. (not sure if they all work)
701 stator and harness.
4 Props. No idea what they all go to. At least 3 are Skat Trak though.
550 stock exhaust. (90 bend section not in picture but have)
Ride Plate Ocean Pro for Kawi JS hulls.
Ride Plate PJS for Kawi JS hulls.
Ride Plate Protec extended for Superjet.
Oem Pump. I believe from the 550 hull.
A few Ski specific tools.
Not pictured: Milk crate of random miscellaneous stuff like hoses, clamps, straps etc.
Good chance you will leave with some other random goodies from my little shop.
I'm moving out of my place here in GA, and going full time RV. I can't take my ski stuff with me so everything has got to go.
My plan is to sell everything you see and listed here at once. $9500.00 takes it all!
Red Ski: 1995 Superjet in a 90 hull. I have the vin plate and bill of sale for the hull.
Stoyer Hull: My original 95 Superjet bottom deck. I have the cert of origin, but no idea what happened to the vin plate.
All 3 hulls have the usual cracks scratches and dings you would expect, but all ridable as they are. Expect some fiberglass work if you like a flawless hull.
The red ski is in running condition and runs very well.
Motor: "Built by Paul Lehr LPW"
701 with LPW Shredder Port, Gen1.
61X bottom end with new oem crank.
ADA Girdle Billet Head.
Factory Pipe W/ Limited chamber.
Wet Jet Intake manifold.
Carb- 44 Mikuni.
Lightened flywheel.
Hull:
90 Square with modified hood, and nose piece.
Wamiltons 1st gen footholds.
Through hull one way scupper.
Jet Dynamics ride plate and intake grate.
Skat Trak prop.
Handling:
AC Racing aluminum handlepole.
UMI steering with 7 deg bars.
X Metal finger throttle.
Stoyer Hull: Empty
Watercraft Factory Carbon top deck and hood.
X Metal Handle Pole and Pole bracket.
X Metal steering and Handlebars.
550 Hull: Empty/Pole and bars
550 Motor: IJSBA 550 Limited class set-up. (PJS Head, port clean-up, Timing advanced, minor carb mods.) It was running when I pulled the motor in 1996. No promises now. lol
650 Motor: Incomplete and needs rebuild or part out.
300 Motor: Incomplete and needs rebuild or part out.
2 rolling Shop/Work Carts.
2 MMF Water/Scissor stands.
Other Parts:
2- 44 Mikuni Carbs.
Anodized billet drive couplers.
2 X Metal Scupper valves.
Hydro-Turf Handle Pole Pad.
Jettrim 550 nose/hull brackets with original hardware. (extremely rare)
UMI Steering Plate.
Bunk Mates unopened. (set of 6)
5 CDI's oem and protec. (not sure if they all work)
701 stator and harness.
4 Props. No idea what they all go to. At least 3 are Skat Trak though.
550 stock exhaust. (90 bend section not in picture but have)
Ride Plate Ocean Pro for Kawi JS hulls.
Ride Plate PJS for Kawi JS hulls.
Ride Plate Protec extended for Superjet.
Oem Pump. I believe from the 550 hull.
A few Ski specific tools.
Not pictured: Milk crate of random miscellaneous stuff like hoses, clamps, straps etc.
Good chance you will leave with some other random goodies from my little shop.
Attachments
Last edited:
