Super Jet Starter Seal

[squash]

Does anybody know a part number for the seal that goes in the front of the starter? I was hoping to pick one up at my local bearing supply store.

 

[4iflounder]

Did you take the stater apart, or are you talking about the seal that goes on the outside of the starter and it seals with case? If it is the one that goes on the outside, it is an o-ring. If it is inside the starter, you should just be able to take it in and have them match it up.

 

[squash]

I've got the starter apart. It's the seal behind the needle bearing.

 

[SJBrit]

Use some 1211 silicon too - best to me absolutely sure that it's watertight.

 

[4iflounder]

I don't have the PN. The best thing to do is taking in with you and have it matched up...

 

[Al//gsx//sj]

here's the info on the seal. NAK TC 13 24 7 3 in that order.

 

[OCD Solutions]

I just ordered a rebuild kit from JSS that includes the bearing, seal and brass bushing.

http://www.jetskisolutions.com/p53_starter_motor_bearing_rebuild_kit.html

 

[squash]

I just ordered a rebuild kit from JSS that includes the bearing, seal and brass bushing.

http://www.jetskisolutions.com/p53_starter_motor_bearing_rebuild_kit.html

Great, thanks for the info.