Custom/Hybrid Stunt Hull build....My first ski build.

[emachines]

Both the top piece and the bottom piece (black piece) are made of aluminum.

 

[Waternut]

You should be fine for a while then. That should help spread out the load out pretty well. The biggest problem I had was the bolts pulling down through the fiberglass.

 

[emachines]

Good deal!......I appreciate the input waternut . It'll be a few weeks before I get an engine and pump and start building this thing, but as soon as I do I will keep you guys updated !

 

[emachines]

hey eastbay, I tried sending you a pm, but your inbox is full......clean that s%^& out and send me a pm and I'll get back to ya lol

 

[emachines]

so it's been a while, but I have finally got some parts coming to get this thing built. I ended up getting a fresh built 62t bottom 61 x top 718 with a port and polish job. Im going to be running stock sj ignition, stock 38's, and a factory B pipe (which I still have to buy) . I've got a stock sj pump to go along with it. Any input on this engine setup would be greatly appreciated, I am v I'm getting everything from Chris Fiore. Once the part's arrive I will begin updating with photo's.

 

[Tmart]

I've dealt with Chris many too. Great guy and loves the sport. My buddy has a 718 in his carbon freak and it hits pretty solid all the way through. In a stunt, I think you'll be very impressed w/ the power. The hull looks small outside the water, but when you're riding it, its even smaller. I love mine!!!

 

[emachines]

I've done some checking around on here, and everyone has been happy with his service....So far he has treated me very well.....and I'm am getting very excited about this ski, after some research It seemed the 718 ported motor was the best way to go for bang for buck, and reliability.

 

[Tmart]

and you can't go wrong with anything from Jetworks

 

[emachines]

It's been awhile, but I'm ready to start wrenching on this thing. I've got a line on a waverunner III 701. It's only a 61x, but it will be an inexpensive way to get this ski up and running.....can i use the waverunner III pump with a superjet driveshaft ?

 

[haves0090]

any updates on this thing??