Super Jet Suggestions on lowered handle pole bracket for RN 04

[kawasaki_MI]

Hey need suggestions on lower handle pole bracket for RN I will be getting a lowerd 24/7 hood and nose piece soon. wondering what good opions are out there or is it just as easy to make one, I know a few people that can fabricat? thanks

 

[Balduccimoto]

Blowsion lowered handlepole bracket on my 08 with their joe Kenney hood. Its a great piece and 1 hole for breather. Works great for stock handlepole. It is really low, you actually have to start putting in the pole bolt and the hex head won't clear the hull. At that point loosen the bracket bolts to clear. You can run a handlepole spring with it, and it has 2 bolt holes there where you can hook up their hood straps.

 

[Big Kahuna]

Xmetal can make you a single or dual breather setup, or Wamiltons.

 

[kawasaki_MI]

Been looking at that blowsion one gunna have to save some more money looks like lol. but I did get an awsome deal only 450.00 for hood, nose, and tubbies all painted so that helps. thanks agian!

 

[Twinturbostang]

Best bang for the buck
http://www.raddudesfi.com/raddudesfi.com/Part_-_SuperJet_Pole_Bracket.html

 

[glennbbautomachine]

Been looking at that blowsion one gunna have to save some more money looks like lol. but I did get an awsome deal only 450.00 for hood, nose, and tubbies all painted so that helps. thanks agian!

Sweet deal, who did you score that from?

 

[kawasaki_MI]

Sweet deal, who did you score that from?

Got them from a guy that makes them here in MI send him a PM if interested skibum

 

[kawasaki_MI]

Best bang for the buck
http://www.raddudesfi.com/raddudesfi.com/Part_-_SuperJet_Pole_Bracket.html

Thanks man I actually have one exactly that came with my ski, but someone before me welded some wierd square stops on it and worped it bad. Might try and fix it though thought it was just a home made thing didnt know they were sold like that.

 

[toyota00]

cold fusion has one

 

[High Speed Industries]

x2 on the rad dudes pole bracket. For $100 you really can't do any better. It even comes with the backing plate.

 

[fat kid]

So, can anyone explain the process of installation, and what advantage there is to this lowered handle pole bracket? I am having a hard time finding what exactly it does. I want to know if it moves forward, or just lowers the pole. I am thinking of moving my pole bracket 4 inches forward... It will take some glass work... So before I go cutting up a perfectly good super jet, I'm trying to gather as much info as I can to make an educated decision to move the bracket forward, or cut my pole 4 inches?

 

[Harbor]

So, can anyone explain the process of installation, and what advantage there is to this lowered handle pole bracket? I am having a hard time finding what exactly it does. I want to know if it moves forward, or just lowers the pole. I am thinking of moving my pole bracket 4 inches forward... It will take some glass work... So before I go cutting up a perfectly good super jet, I'm trying to gather as much info as I can to make an educated decision to move the bracket forward, or cut my pole 4 inches?

Cut the poll 4 inches......much less work

The lowered brackets mount in the same location, the poll pivot bolt centerline is moved closer to the hull "lower" to bring center of gravity closer to the tray. Some may also move the centerline a little forward too but now where near 4 inches.

People switch out the hood and noise piece for low profile ones, they are shorter so a lowered poll brackets makes it all match height wise too

 

[fat kid]

ya, I saw the brackets they have are more for lowering, and not moving forward... Just a tad each way... Thanks for confirming no one has a real big jump forward! I'm worried about pivot point and leverage as far as moving it forward instead of chopping it.... Not concerned about how much work is involved, just as long as I get awesome results.... Sorry for thread jacking.... this thread can return to normal if no one else chimes in. = )