SuperFreak Ebox Mounting

Mdavies_02

Mdavies_02

Location
Stouffville, Ontario
I have a Superfreak Badass -7 with a front foothold and I've been having a hard time keeping the ebox mounted. It came with a bracket with inserts to mount the ebox too but it separated quickly.

I used appropriate adhesive (2part, expensive, can't recall the name) and it still separated from the bulkhead. This may have been from lack of preparation (Mid season repair) or some other fault of mine.

For the remainder of the season I drilled my bulkhead and bolted the ebox to it directly. Is there an issue with this? I'd like to get proper hardware (Stock RN Ebox hardware even) behind it but currently I have less then 1" of space from my ebox to my engine. The Front Foothold really limits my space here.

Looking for suggestions on brackets or just leaving it bolted to the bulkhead.

Thanks

Mike
 
Big Kahuna

Big Kahuna

Administrator
Location
Tuscaloosa, AL
I bought the Cold Fusion Mount. Made things easy. Also got some Stringer Washers (You see them on outside of rickter hulls where the footholds mount thru the hull) and counter sunk some 8mm pan head bolts. Not sure how this would work with your front foothold.
 
Sanoman

Sanoman

AbouttoKrash
Location
NE Tenn
Big Kahuna said:
I bought the Cold Fusion Mount. Made things easy. Also got some Stringer Washers (You see them on outside of rickter hulls where the footholds mount thru the hull) and counter sunk some 8mm pan head bolts. Not sure how this would work with your front foothold.
Click to expand...
This by far is the best way to install the ebox.l always bolt the cf mount under the pad and turf to hide them.Neat and clean
 
You must log in or register to reply here.
Top Bottom