This is basically a complete part out. Was going to pursue this project but deciding to back out. Please message me if you need more photos. I know I am missing a couple pictures, working on getting everything in here.
Please plan to pay shipping and PayPal fees if you choose goods and services.
1 - New b pipe chamber coupler $20
3 - ebox mounting brackets $15
5 - 62t intake with new two-stage boyesen reeds - $85
6 - 62T cases, excellent condition $175 or $195 with bed plates, $270 with intake and bedplates
7 - standard bed plates $25
8 - 61x flywheel $55
9 - coupler cover $10
10 - ebox halves $30 for both
11 - New unbranded sponsons, resemble destroyers $235
15 - oem 144 pump stator section $40
18 - superjet driveshaft $140
22 - OEM fuel fill $15
24 - NEW HSI squarenose to round nose pole conversion bracket with oem hood hooks - $240
25 - steering cable 90-07 $25
26 - throttle cable $20
27 - flywheel cover $10
28 - protec 61x adjustable rev limit cdi $125
30 - squarenose chin pad $15
43 - finally, I have a 1994 superjet hull and hood that I can either sell outright now, or I was planning to fix it a bit to make a build be a little more palatable to someone. $200 as it sits. Currently the tray is ripped out and defoamed, side of hull below the water line needs a repair, and somehow the Midshaft mount area got damaged. Not sure how, bought it like this.
44 - Squarenose in tray fire extinguisher bottle holder $30
SOLD ITEMS
2 - Superjet length midshaft shaft only with coupler $100.
4 - new 2x Mikuni 38’s, never ran $250
12 - Oem starter $50
13 - drive couplers $30 for both
14 - 61x exit nozzle $35
16 - jap bearing pump rebuild kit $60
17 - oem wear ring $25
19 - oem crank seals $40
20 - waterbox rubber straps $40
21 - OEM round nose waterbox $175
23 - superjet fuel tank $100
29 - AC racing -2” aluminum round nose superjet pole $350
31 - UMI steering system $100
32 - Pole limiting rope $20
33 - 4x rubber strap hooks for tank, waterbox, etc $20
34 - NEW 2x KP rubber isolating pads for waterbox (to be used with oem or AM strap hook) $20
35 - NEW lynx 94+ midshaft housing (from JM) $115
36 - 61x cylinders need bore but good condition overall $75
37 - oem ride plate 90-07 $25
38 - oem hood latch hull and hood side $15
39 - oem engine mounts $50
40 - gas tank rubber straps $40
41 - 90-95 superjet long exhaust tube
42 - 90-95 fuel fill tube with gas cap
Please plan to pay shipping and PayPal fees if you choose goods and services.
1 - New b pipe chamber coupler $20
3 - ebox mounting brackets $15
5 - 62t intake with new two-stage boyesen reeds - $85
6 - 62T cases, excellent condition $175 or $195 with bed plates, $270 with intake and bedplates
7 - standard bed plates $25
8 - 61x flywheel $55
9 - coupler cover $10
10 - ebox halves $30 for both
11 - New unbranded sponsons, resemble destroyers $235
15 - oem 144 pump stator section $40
18 - superjet driveshaft $140
22 - OEM fuel fill $15
24 - NEW HSI squarenose to round nose pole conversion bracket with oem hood hooks - $240
25 - steering cable 90-07 $25
26 - throttle cable $20
27 - flywheel cover $10
28 - protec 61x adjustable rev limit cdi $125
30 - squarenose chin pad $15
43 - finally, I have a 1994 superjet hull and hood that I can either sell outright now, or I was planning to fix it a bit to make a build be a little more palatable to someone. $200 as it sits. Currently the tray is ripped out and defoamed, side of hull below the water line needs a repair, and somehow the Midshaft mount area got damaged. Not sure how, bought it like this.
44 - Squarenose in tray fire extinguisher bottle holder $30
SOLD ITEMS
4 - new 2x Mikuni 38’s, never ran $250
12 - Oem starter $50
13 - drive couplers $30 for both
14 - 61x exit nozzle $35
16 - jap bearing pump rebuild kit $60
17 - oem wear ring $25
19 - oem crank seals $40
20 - waterbox rubber straps $40
21 - OEM round nose waterbox $175
23 - superjet fuel tank $100
29 - AC racing -2” aluminum round nose superjet pole $350
31 - UMI steering system $100
32 - Pole limiting rope $20
33 - 4x rubber strap hooks for tank, waterbox, etc $20
34 - NEW 2x KP rubber isolating pads for waterbox (to be used with oem or AM strap hook) $20
35 - NEW lynx 94+ midshaft housing (from JM) $115
36 - 61x cylinders need bore but good condition overall $75
37 - oem ride plate 90-07 $25
38 - oem hood latch hull and hood side $15
39 - oem engine mounts $50
40 - gas tank rubber straps $40
41 - 90-95 superjet long exhaust tube
42 - 90-95 fuel fill tube with gas cap
Last edited:
