I have another question. Mine has the kill switch disconnected. The idle is turned down low, not allowing it to idle. I like to learn by tinkering with things. I discovered, if I turn the idle up, it will idle, but not shut off by pushing the button or pulling the lanyard. So that must be the result of the white/black wires that have been disconnected. I connected them one day, and the ski would not turn on. So by disconnecting them again, it started up. I'm fine leaving it like this, but if I decided to allow it to idle, what am I missing in terms of wires?
Superjet runs funky again
- Thread starter Galaitoto
- Start date
- Location
- outer banks
u need the idle up a little to run in water that could be some of your probleme with carbs not cleaning out ,also it sound like u need a new kill switch set up they do go bad from time to time! thats y it wont start when plugged in it is grounding out! unsave to run without lanyard and kill switch. and if u need carb adjustment help go to the carbs manufactures web site u should be able to down load their manual or search (carb tuning) on this sight thats how i got my proper water line routing done!