Surf prop recomendations for 144

[SALTDOG]

Just finished 144 pump cut and weld conversion but just used a stainless prop that came with the pump I bought (I think its a stock blaster prop?). Any tried and proven recommendations for a thrusty (is that a word?) surf only impeller for a 144 ? Don't care about top end at all, have a new motor in it but cant really feel it because its propped to tall!

 

[mxr181]

My buddy is running an 08+ Superjet prop in same setup and very happy. It's almost the same thing as an impros 9/15 hooker but cheaper

 

[DannyF]

I'm running a 12/17 swirl in my FX w/ the 144 pump. Really good bottom end even with the stock pump shoe. Motor setup is a 61x 760 ported cases/cylinders, b-pipe and dual 44's.

Hope that helps

 

[kdub133]

The 08+ Superjet impeller is what I run hits very hard off the bottom. Almost exactly the same as a 9/15 that everyone else runs but 1/2 the cost.

Mods- Ported 61x, single tapered bored 46 (worked good with stock 44), epic ignition, fx1 b-pipe, and 180 psi ADA head.