- Location
- quebec,canada
What is the best ride plate and intake grate to stop porpoising
sxi pro porpoising
- Thread starter marc340
- Start date
- Location
- Thief River Falls, MN
I shimmed the back 2 bolts on the rideplate, helped a ton......
SterlingSilva
-----------------
- Location
- Colorado Springs
I'd run whatever you can find thats extended. I also shim the rear bolts with a cpl washers.
SXIPro
JM781 Big Bore
- Location
- Here on the 'X' mostly
I had an extended Worx Dominator that I shimmed as well. I believe I had a Jet Dynamics Scoop grate, but can't quite remember. I sold my Pro quite a few years back. Thing that helped me the most was more tray time and to ride with my steering a tiny bit turned. If I kept it 100% straight it was a bucking bronco.
- Location
- Arnold MO.
Agreed, Tray time is the best solution. I used to run a extended R&D 110mm plate. I now use a shortened and d cut stock plate. I also run a R&D grate that helps a ton in the corners and in chop
- Location
- South OC, CA
I had no luck with plates and shimming plates-- hull extensions are the best way to keep the nose flat.
- Location
- Dallas, GA
Tubbies and Hull extensions are the all out cure for this. The best mod Ive done to my Pro.
snowxr
V watch your daughters V
- Location
- Waterford, MI
I had front sponsons, hull extensions, r&d ride plate and grate, and lots of weight under the engine and in the nose. Rock solid. I have an extra set of extensions if anyone is looking for their sxi pro.
Im interested, how much?
snowxr
V watch your daughters V
- Location
- Waterford, MI
$75 sounds fair.
Do you know what kind they are?