is it worth the hassle/money to run a msd t/l system, or is a TBM w/enhancer setup comparable? $700 VS $1100 i might be "beating a dead horse here but who care the site has been dead lately so...tell me what your experience has been with different setups
my main question is will the tbm w/enhancer be close in power compared to a msd T/L setup
my motor is as follows;
82mm
lpw freestyle port
new hot rod crank (they are cheep)
makuni 44's
bcw intake
85mm reduction nozzle
ada girdled head 31cc and 33cc domes i will use the 33 most of the time
boysen power reeds
10-16 7mm set back hooker
b-pipe w/limited chamber
i have a stock lightened wheel now and a new enhancer but i think i will be happier with a tbm or rad wheel:ugh:
my main question is will the tbm w/enhancer be close in power compared to a msd T/L setup
my motor is as follows;
82mm
lpw freestyle port
new hot rod crank (they are cheep)
makuni 44's
bcw intake
85mm reduction nozzle
ada girdled head 31cc and 33cc domes i will use the 33 most of the time
boysen power reeds
10-16 7mm set back hooker
b-pipe w/limited chamber
i have a stock lightened wheel now and a new enhancer but i think i will be happier with a tbm or rad wheel:ugh:
Last edited: